r/Darkroom•
graycode

It's cramped but it works! My bathroom darkroom using a large format camera as an enlarger.

It's cramped but it works! My bathroom darkroom using a large format camera as an enlarger.

Posted Apr 29, 2020, 6:10 AM UTC

10
graycodeOP•

Details:

I'm using my Chamonix 45F-2 large format camera with an Intrepid Enlarger back. It can print any size negative from 35mm up to 4x5. For 4x5 I use a 150mm taking lens, and for 120 and 35mm I use 80mm and 50mm enlarger lenses.

It works well enough. The main pain point is that adjusting between negative or paper sizes, or just recomposing the crop of the image in general, is time consuming due to the need to adjust the height of the camera by futzing with the center column of the tripod. With the heavy camera hanging quite some distance from the middle of the tripod, this is a very delicate operation. For some formats I even have to invert the column and hang the camera from below the tripod. I bought a macro focusing rail to put between the camera and the tripod that allows me to fine-tune the vertical position of the camera, but for any major movements the tripod itself has to be adjusted.

Also, the Intrepid Enlarger comes with a lens board meant to hold LTM-mount enlarger lenses, but it was too small to fit my 50mm lens so I designed and 3D-printed a better one with a bigger space for the lens barrel.

11
graycodeOP•

Here's a picture of it after printing a 4x5 neg onto 5x7 paper, where I had to invert the center column to get it close enough: https://i.imgur.com/33M5w0R.jpg

7
accoyle•

Whoa! I had no idea enlarger backs were a thing. I'll have to look into this for my own darkroom since my enlarger doesn't print above 120. I love weird workarounds like this lol. Thanks for sharing!

7
zorzalcriollo•

Is it a light source that fits the back of the camera? That is a GOOD idea!

2
theyoungestoldman•

It's a kit you can buy: light, timer, and carriers for small, medium and 4x5 formats.

In The Print from Ansel Adams he suggests the best way to get an 8x10 enlarger is to take a cheap 8x10 camera and just slap a light source on the back. After all its a pretty basic concept: light > film > lens > paper.

4
zorzalcriollo•

It is basic and looks simple, nonetheless it's not the standard set up, here it is presented as an extraordinary and difficult thing.

1
theyoungestoldman•

To me it's biggest advantage is portability and stowage. In a cramped apartment without room for a bulky dedicated enlarger? Stick this on the back. Exteme example of someone moving away from a long term but temporary period and don't want to ship their enlarger or buy a new one? Take this with you.

5
YoungyYoungYoung•

I would recommend not bothering with the kit; take an enlarger mixing box and tape it to a flashlight, then tape the thing to your camera. Use a kitchen timer or something to time, or spend like $30 to get an led with an arduino and some supporting electronics. The intrepid kit is an overpriced arduino with a light bulb.

1
daughterofcato•

This is Awesome! what did you do with your light proofing? it looks like you have some ventilation too? I’ve just moved and having a bit of trouble with light proofing my bathroom set up 100 percent so any tips would be great!

6
graycodeOP•

I cut that board to fit the window, and inserted a light proof vent into it. Not sure if it actually helps with ventilation, the flow rate is pretty low, even if I set my house's furnace blower to be constantly running.

Around the outsides of the board I have stapled some lightproofing metal sheets (basically some very thick tin foil painted black). They're attached on the other side and folded over the edge, then folded back out again, and that works as a light baffle. Electrical tape fixes any leaks.

For the door, I bought a big piece of super heavy black cloth called Duvetyne from a theater supply store (much MUCH cheaper than buying similar stuff designed for darkrooms and just as good). I have it hanging from some hooks I added above the door, and there's generous overhang on all sides to act as light baffles.

It's light proof enough for developing film and only takes a couple minutes to set up.

3
bigmedallas•

Around these parts you can buy a decent enlarger for less than you paid for the enlarger back. You must have the patience of a saint!

3
graycodeOP•

I don't know, an enlarger that'll do 4x5, with all the negative holders for 4x5, 120, and 35mm, in good working order, plus a timer controller, including shipping most likely, imo would be tough to find for the $225 I paid for the back & accessories (timer, MG filter holder & lens board). That and 4x5 enlargers are huge, whereas this thing fits in a shoebox.

Though a real enlarger clearly has this beat when it comes to usability, I'll admit. For how infrequently I print, the trade-offs are okay for me.

8
[deleted]•

[deleted]

1
graycodeOP•

Not sure I understand your question. That is indeed how you focus with this.

1
[deleted]•

[deleted]

1
margiegogo•

I had almost the same set up in my first darkroom! Enlarger was on the counter, trays on a board over the bath tub, print washer hooked up to the sink.

1
mac_the_man•

Very ingenious. Well done.

1
[deleted]•

[deleted]

1
TheDaftPunk•

genius

1
theomarest•

This is amazing! I want to start color printing 4x5 but am dreading finding a 4x5 color enlarger. How big do you think you could print with this? Do you think you could use filters like these pretty easily?

1
YoungyYoungYoung•

Those filters work quite well and I've had no problems in the few times I've used them.

If you can afford a 4x5 camera you can afford a 4x5 color enlarger, and if you are patient enough to get a cheap 4x5 camera, you're patient enough to get a cheap 4x5 enlarger. I got my entire darkroom for only slightly more than an intrepid kit, which is an overpriced arduino with a nice case. My friend got a beseler xl (or whatever it's called) and then two more 4x5s. Three enlargers for the cost of a single arduino.

1
shafferwaffer•

Yeah I’m sure those filters would fit in the holder. But I’m sure it’s super difficult trying to print and balance out colors with external filters like that. Not to mention the issue of getting scratches on the filters

1
YoungyYoungYoung•

It really isn't difficult at all, and the process for color balancing with gel filters and inbuilt filters is exactly the same. There's a tad bit more fiddling, but "super difficult" is an extreme exaggeration. Scratches aren't an issue on normal enlargers (unless they're huge) since the light is diffuse enough to mask out imperfections. However, the intrepid "enlargers" will have a problem.

1
im_beck•

I need this in my life. Or just a bigger apartment. Lol

1
turquoisebuddha•

Awesome setup! This might be a dumb question but how do you manage chemicals (e.g. storage and setting up the trays) between sessions?

1
graycodeOP•

Thanks! I just keep em in my garage. For already mixed chemicals, I keep a set of glass bottles so I can reuse them for a few sessions.

2
turquoisebuddha•

Thank you for replying! So do you just use funnels to dump from the tray into a bottle? I have always worked in public dark rooms and the chemical aspect is most the intimidating to setting up a home space.

1
graycodeOP•

Most trays have one corner that's shaped like a little spout. If you're careful, you can pour the tray directly into bottles using that; so you don't even need a funnel.

I don't worry too much about the chemicals. I figure that I'm in my bathroom, working above the tub, where everything is waterproof more or less, and I wear an apron and gloves, so cleanup of any spills is easy. For the wood board that I put over my tub to make more workspace, I put a couple coats of polyurethane lacquer on it to make sure that it too is waterproof and won't soak up chemicals.

2
theyoungestoldman•

Hey! I've got the same Saunders Slimline easel! Bit of a pain in the ass to get borders just right.

1