Transition to MegaBase, How Not To Get Bored
Hello Factorians,
I decided to build my first 1kspm megabase recently. My biggest factory until was around 300spm, but I do have over 500 hours and have been playing since before rockets (with rocket defence). I found my first transition from starter base to "bigger"-base very boring, as it feels like you're just building another base from scratch, it takes forever, and you don't see it work until everything is done. So I thought a lot about how to approach it and keep it fun. Then, u/ferranferri asked that I could explain my approach a bit better. So I will lay it out quickly (sorta), and explain why.
To go mega, typically you build a big iron build, then copper, then green circuits, etc. It can get boring, as it's just sitting there while you're laying out all the other components. My main idea is to import those goods to your starter base and try to make it faster. You finished your big iron plate build (or part thereof), then import the plates to your starter base and try to push up your SPM. This keeps it fun since you then have to tweak your starter base to handle the higher speeds. And it slowly tests your bigger builds, before it needs to run full speed.
Also, I'm not going to disassemble starter base furnaces and so until later. When I import the goods, I just merge it onto the bus with priority for imported goods. That way, if one of my bigger builds fail for some reason (it happens), my research doesn't stop, because the local factories just kick in. Then it will also take longer to mess up your sweet sweet production graphs. I'll probably disassemble it when I have a mega-mall going, or mega-science is fully up and running. Then I'll stop the importing trains and the trains that bring raw resources to my starter base, and just let the base run dry. And then deconstruct. This is to minimize the amount of stuff on belts and in chests.
Also, when you start your mega build, you don't have to build the entire thing immediately. Build only a quarter of your iron build first, or whatever. You just want it running by importing the goods to your starter base. This way you will catch (inevitable) mistakes in your builds early on. And if you only have a 10th of the big iron build built, that's all you have to fix. You don't have to debug and fix 500 furnaces and 2000 beacons at the same time. It's much more manageable.
Here is a link to my base where I'm currently doing this: https://imgur.com/gallery/fi8CeRG
u/ferranferri asked what steps I took after my starter base is going, so I will list them quick:
- Finish starter base.
- Figure out how big you want to build, and at 10%. I'm aiming for 1kspm, and building to 1.1kspm.
- Build a part of the mega-iron-plate build. My full iron build requires roughly 250 furnaces. So I decided to divide that into 3 identical setups and built only a 100 furnace build to start with.
- Import iron plate to your starter base, and try to push up your starter SPM.
- Do the same for copper plate. Import, and squeeze out more SPM.
- Green Circuits. Import, squeeze out more SPM.
- Oil, Plastic (I didn't import that, because it mainly goes to:)
- Red Circuits. Import, squeeze out more SPM.
- Steel. Import, squeeze out more SPM.
- Blue Circuits. Import, squeeze out more SPM.
- Low-Density Structures. Import, squeeze out more SPM.
- Etc. (Will see what starves next in my starter base after I start importing Low-Density Structures.)
- Once your megabase is done, cut all resource inputs to your starter base, and let it run dry. It will make it easier to deconstruct. Or just nuke it.
Here are some notes:
- Overbuild slightly. I'm aiming for 1kspm, so I'm building a 1.1kspm factory, although my labs will only be able to handle 1kspm. Then, if your trains take slightly to long, or your belts are a little to slow, or your trains struggle to get out of the station, your system can handle it. Do this, especially if it's your first base. It takes a lot of experience to get 100% efficiency from your base. It also helps with extra circuits required for modules.
- Keep an eye on power, and overbuild it early. When I started with my iron build I made sure to have an 8 reactor power setup running. Beacons take a lot of power. On my map, you'll see 3 such setups, which get inefficient. If I was to do it again, I'll start by building a 12 or 20 reactor setup.
- When you build only a part of a mega build, remember to leave space for the rest. More than you think you'll need. You always need more. And try to visualize where the rest of the build will go. You'll see for copper (bottom left of my map), I already laid out the tracks.
- Automate as much as you can. Have an engineering train with all resources you need to build large builds. Have a passenger train. Have dedicated stops for both these trains at your mega outposts. Every mega outpost of mine has a service area with a passenger train, an auto trash train, and a refueler train. It takes time to set up, but the amount of time you'll save is enormous.
- Try to copy and paste a lot. My iron and copper build is identical. I can copy and paste my service area. It saves a lot of time and hassle.
- I used the Kirk McDonald Calculator. Here is the setup. Remember, the number under "beacons" specifies the number of modules, not beacons.
But yeah, that my 5 cents. I hope it helps someone!
TL;DR: As you slowly put your megabase together, import the outputs to your starter base, and try to increase the SPM of your starter base. It keeps it fun, because you have to tinker a lot, and it slowly tests all your new mega factories.
Posted May 4, 2020, 5:17 PM UTC
Vanilla megabase scaling is definitely not for everyone. I much prefer going into content mods like Krastorio, AB, and PyMods over vanilla megabasing but I'm glad you found a way to make it work and keep it fun and engaging! Godspeed to you.
Yeah, I would like to try that sometime. Instead of building bigger, you just use stronger beacons/modules/factories. It results in nice clean factories. Although AB is a bit much for me, don't want to figure out PetroChem.
yeah, AB is a lot. Krastorio is a smoother step from vanilla to modded play if you go that route sometime. Cheers