Grout between shower drain and shower floor has failed. Any way to fix without having to replace entire tile floor?
I’ve already poured 5 bottles of concrete crack filler thinking that I could backfill from the bottom then regrout.
Should I keep pouring more or is there another way?
Pics: https://imgur.com/a/t3gwq6x
Next steps based on your suggestions so far:
Use backer rod to plug as deep into space between drain pipe and concrete surrounding drain pipe. Keep filling without trying to fill entire void however large is may be.
Edits based on questions:
Edit 1: The holes you see are only around that area and the tie and grout areas are still supported with thinset and concrete below them.
I tapped throughout to confirm hollowness and chipped away any grout not supported from the bottom.
Edit 2: When pouring, the liquid funnels from the outside in and moves toward the drainpipe.
Edit 3: First floor on a slab. No fiberglass pan.
Edit 4: I know for a fact I am on a slab and there is no space for insulation. I have torn out another shower floor in this house (hence why I don't want to have to do again if avoidable). Different issue where the grout and tiles around bottom perimeter were failing and leaking water into surrounding baseboards and walls surrounding shower.
There is just concrete slab under a mudpan.
I'm in South Florida home built in 1982.
Edit 5: I don't think there is a pipe broken for a few reasons:
- I can see the water resting in the S or P trap. At the very least I know that portion is intact. That is old water since the shower has not been used in about 2 weeks.
- Shower has been in use for years since I moved in by guests that stay in this guest room so maybe like 20-30 or so showers a year without another problem reported.
- When I flush nearby toilet, I can see the water in the P or S trap moves slightly which tells me there is a decent seal in the pipes and the venting is working as water leaves through the drain system.
- After pouring in 5 quarts and letting it sit for 2 nights, I tested the shower drain by pouring water directly into it and there is still normal drainage.
Posted May 5, 2020, 1:04 PM UTC · edited