Just got a Gonset 6m radio from an estate sale

General

I just picked up an old Gonset 6m radio from an estate sale. No idea if it works. Its missing the back panel and has no power cord. Anyone have a suggestion on where to look for manuals and places to buy spare parts? I could probably google this but I figured I'd ask the people in the know direct.

BEHOLD! My majestic silver paperweight.

Posted May 6, 2020, 6:17 AM UTC

49
AG7LRCN88xc [Extra]•

Don't try to power it up before restoring it, that could burn it up.
If you want to try restoring it yourself, watch some of Mr Carlson's videos on youtube. He has a lot of good videos on how to restore vintage radios.

Just keep in mind vacuum tube equipment uses high voltage and can kill you if your are not careful. Transmitters and amplifiers are especially dangerous.

9
Beastlykings[G]•

Mr Carlson! Love that guy

3
Brooding_PsychopathOP•

I'll check those videos out, thanks.

1
6-20PMCA [Extra] [VE]•

If you don't have the tools or experience for radio restoration, I would just place it on the shelf and forget about it.

Ideally you would own or have access to an isolation transformer, a current limiting variac, oscilloscope, multi meter, capacitor tester, soldiering iron, and you should have experience with fixing old power supplies and validating circuitry has correctly installed safety capacitors.

At the very least, you will need to replace all the electrolytic capacitors.

1
budude2[G][TX]•

You could always use a light bulb limiter if you don’t have a variac

2
6-20PMCA [Extra] [VE]•

Totally! Thanks.

1
[deleted]•

AM crystal controlled 6 meter radio. It would take a lot to restore it and a lot to find anyone to QSO. Sorry for being discouraging.

-1
Brooding_PsychopathOP•

I'm not trying to get into the century club with it. I just rescued it from a landfill and I'd like to get it on the air at least once to honor the ham that used it before.

5
threeion3ka [e]•

It’s doable... I fixed up a few of those as a teenager in the 90s... bought a pile of them at a hamfest for like 20$, between 9 of them I was able to get 4 working and a little 6m net with some ham friends... the electric eye is pretty cool

I went looking for my notes from then but they’re gone at this point.

Also, heed the warning on high voltage, one arm behind the back, make sure everything is discharged, etc...

3