Is it dangerous to link two psu so that they both turn on at the same time?

(I moved this here from /askreddit at the suggestion of someone there)

I've seen many forum posts on other sites debating whether the draw monitoring in a psu would get screwed up by this, and damage the psu. There seem to be arguments for both sides, so I figure that it's better to ask here because Reddit has more members that actually know electrical theory better than those other forums.

I would use a connector similar to this one: http://www.frozencpu.com/products/5637/cpa-167/Lian_Li_Dual_Power_Supply_Adapter_Cable.html

with a CoolerMaster PowerPlus 460W-EU and a generic 550W psu.

I've got a lot of extra drives and fans that I'd like to keep on the generic while using the CoolerMaster for my mb and video card.

Posted Apr 1, 2011, 7:37 AM UTC

107
CannibalCow•

That connector you posted would work perfectly fine for what you're talking about. The green and black are not an output, they're to switch on the power supply. Pressing power bridges those two wires and starts the psu. You can do the same thing with a paperclip.

Neither power supply will know the other exists since only one is technically connected to the motherboard, the other is just piggybacking on the on/off switch.

8
Shadow703793•

Well said. Further, I have used that exact connector to run Dual PSUs for 2P set ups and have not had trouble. That connector bridges the black and green to both PSUs so they can be turned on at once.

** HOWEVER, DO NOT RUN a non-name brand Generic PSU. EVER.** This is just asking for trouble.

0
snowball666•

That will work well.

I've used a similar setup while benchmarking so I could have a dedicated PSU for the GPU's and another for the CPU/mobo.

3
Akasa•

I have done this without the adapter but with a piece of foil many years ago and it worked okay for the week I ran it like that.

But I would never use a Generic PSU , especially if I can't locate the OEM manufacturer. If you value your hardware , I would stay clear and save the money for a good PSU that is adequate for your needs.

3
GPNovus•

Should be fine, but just keep in mind that the wattage limit on most power plugs is ~1600 watts.

3
[deleted]•

[deleted]

1
FallacyOFfallaciesOP•

Thanks for the responses! I'll do it!

1
docprobly•

I'm not sure what you're looking at there - but this MIGHT help: If I want to turn on two PSUs at the same time I just plug them both into the same power bar and then use the switch on the power bar. I would be VERY nervous (like never) about connecting PSUs' OUTPUTS, but gang-controlling the on/off at the front end should not be a problem with any kind of power supply I've ever seen.

0