Buying a Case Based on Dimensions

Build Upgrade

I'm looking to get a new case, but I have a little nook in my desk that I'd like it to fit into if possible. I haven't found any website that allows you to filter by dimensions, and as a result it's pretty difficult to slog through all of the case options that exist in the world. The nook of the desk is completely open on front and back, and completely open on the sides on the front half as well.

In short, the space I have available is 511mm L x 236mm W x 495mm H

Given that side-mounted fans seem pretty much irrelevant now, I'm not very concerned with the width as long as it fits. I haven't really found any ATX mid tower cases that go past 500mm L, so I'm not worried about that either. What I am concerned with is height. Currently I'm running a Deepcool Tesseract which has just shy of 1.75" clearance on top. By my math, the case should have 43mm of clearance which translates to 1.69" inches, so that seems to check out.

I don't really have any issues with thermals running an overclocked EVGA GTX1070 SC and 8700K which is cooled by a Cryorig H7, but the case is dated, noisy, and frankly it never really excelled in aesthetics to begin with. It's also kind of cramped and cable management is pretty lackluster. I've been running this build for about 2 years now and I'd like to open it up to refresh everything, install an EVGA powerlink that I've been sitting on for months (years?), install a new 2.5" SSD, clean everything off, and probably refresh the thermal paste on my CPU (maybe GPU as well- I bought it used). Based on my experience with this case, it seems like 1.5" (38mm) clearance on top should be sufficient for exhaust fans. That means 457mm H would fall right in that threshold, though I'm not sure if that's pushing my luck. I can remove the panel above the PC, but it's not easy and I keep my headset and earphones on it along with some other stuff, so I'd rather not unless it would really be worth it. Of course, if the front panel I/O is on the top, that would also present some issues of whether things would actually fit. I can pull the case forward a little bit so it sticks out, but I do prefer to have it at least flush with the desk.

I've heard a lot of great stuff about the Fractal Meshify C and at 413x217x453mm it would fit, though it does seem like it's hard to find. The be quiet! Pure Base 500DX also seems promising, but it's 10mm taller and 15mm wider than the Meshify C. That gives me 2mm of clearance on either side and a tighter 32mm of clearance on top. Lian Li cases all seem too wide, to tall, or both. I was looking at the Corsair Carbide Series SPEC-DELTA but despite a size that would work well, it seems like airflow wouldn't be as good with that case. The Phanteks P400A also seems promising, but that would only leave me 30mm (1.18") of clearance up top.

Any suggestions? How much of a tight fit can I get away with? Am I better off waiting since it seems difficult to even find a case in stock these days? I'd like to keep it as far under $100 as possible. TIA.

Posted May 15, 2020, 8:13 AM UTC

12
Artesian•

I don't really have any issues with thermals running an overclocked EVGA GTX1070 SC and 8700K which is cooled by a Cryorig H7, but the case is dated, noisy, and frankly it never really excelled in aesthetics to begin with

You restricted the airflow a lot by stuffing it into a nook. So it's no surprise it's noisy. The system can handle it, but you're likely just making it harder for the fans to breathe...

Meshify C is a good case. Go for it. But don't be surprised if the fans are still loud when you stuff it into an enclosed space...

1
Shassk•

Any average Midi-Tower would fit into 511x236x495, their sizes usually are about 450x210x450 mm.

P. S. Online shops indeed usually don't allow you to filter by dimensions (except I know one that allows), but aggregators (or how is it called in English) do - they take all offers from many shops and give you a lot of filters. I know hotline, ek and market.yandex - they have dimensions filters, but these 3 are for Ukraine/Russia, so availability may be completely different from your country.

1