New PC, can't enter BIOS or Boot Options

Solved!

Just made a simple fresh custom PC. I got everything plugged in and I have a USB to boot and install Windows 10.

My computer gets stuck at a Gigabyte screen detailing the different BIOs, Boot Options..etc at startup. Despite pressing F12 for boot options and even trying out the other F2, DEL, or END keys, nothing is working.

​

I have a SDD in the Sata 0 slot, but it is empty.

​

Does anyone know a possible solution?

​

EDITS: All USB slots have been alternated and have been attempted.

Reset CMOS battery.

Unplugged GPU and now running just the board's HDMI.

Boot Options usable .

​

RESOLVED: The issue was entirely caused by the old BIOS version in the MBO.

With the GPU plugged in, BIOS didn't know how to handle it and refused to boot or allow any input to access BIOS or Boot Options. Once I unplugged the GPU entirely and used the Integrated Graphics, Boot Options and BIOS became available. I then found a BIOS update for my MBO through Gigabyte's website and downloaded it to a USB flash. I then restarted and opened BIOS to update it to a newer version. After that and plugging in the GPU, the computer finally worked properly.

Here was a video that helped me:

https://www.youtube.com/watch?v=aKTNwboL9Ho

​

Thank you all who commented or sent me private messages! I'm posting this resolution incase anyone else has this kind of trouble. Surprisingly, it was really hard to find this solution. Many other common reasons kept coming up as possibilities instead.

Posted May 17, 2020, 4:29 AM UTC · edited

15
Low_Key_Slaps•

Try plugging the keyboard into another USB port (if plugged into the front, try the back of the PC, or vice versa)

1
FlappersnapperOP•

S far I've tried every USB :(

1
Low_Key_Slaps•

Is the issue that it's not recognizing your hard drive?

​

Sorry if this seems obvious but, have you plugged in the power connector and not just the sata? Can you hear the hard drive spinning up (usually extremely quiet)

​

Try reseating power and sata on both ends. Also try new cables, and another sata port.

1
FlappersnapperOP•

I am currently installing windows 10 now :)

I ended up disconnecting my GPU and ran my board's graphics. I did this originally to see if maybe there's a weird MBO error. Now it's working as intended. Once Windows is done, I'll swap to the GPU and see if it will work.

1
Low_Key_Slaps•

Strange. Best of luck hopefully everything else works great!

1