Issues with a Saba Psp 350 - Could anyone help out?
Hey People of r/turntables,
Some time ago i was gifted a great turntable. A Saba PSP 350. I was more then happy and immediatley did some reading about gear, which phono preamp to get, etc.
Now, the turntable i was gifted is quiet old and only has a 5 pin din line out. So i purchased an 5 pin din to rca adapter and a phono preamp to solve the issue. However, after first use, i immediately started having issues with my speakers. Only the left speaker was playing.
First, i thougt it had to do with the phono preamp. I bought a new one, but after playing just one record i started having the same problems again.
I read online that it might be due to several reasons - incorrect grounding, the oxidiation of some connections,... But i cannot figure it out since i don´t have any experience with such matters what so ever.
I´m at a loss here, but don´t wanna give up so fast either. Do you have any suggestions, how i can figure out the exact issue that i have and if there is any (affordable) solution to it?
Posted May 21, 2020, 6:58 PM UTC
Din to RCA adapters can be problematic, just like old phono cables. I usually replace the DIN cable with an RCA cable that is low capacitance and as short as possible. In addition to the cable and the RCA plugs you'll need a soldering iron and some solder. It's not hard to do if you take your time.
Thanks for the advice. I'll look into it.