Anyone have any problems with this gun. I plan on buying it soon as I get back from my work trip.

Anyone have any problems with this gun. I plan on buying it soon as I get back from my work trip.

Posted May 23, 2020, 9:16 PM UTC

418
nachdM4•

Avalon gearbox has its ups and downs. They make great externals so if you don’t mind sinking some money into your gun internals then go for it.

3
AlmostItalianOPMedic•

Gotcha thank you for your insight. It’s tough just going off reviews on YouTube they tend to honey coat it

2
ash_silver1M700•

Never an issue with mine. What issues have you had/heard of?

1
nachdM4•

Well I know vfc guns have self-shimming gears, which are questionable. The piston isn’t the best quality imo, I also know that the tappet plate is prone to breaking. The motor tends to get really hot when under strain and the inline mosfet is kinda questionable aswell. I’ve seen people blow through like 4 fuses on 11.1s aswell.

1
ash_silver1M700•

No self shimming gears in mine and no real wear issues either. The piston feels like a shs plastic wise and I can't say about the tappet plate. As for the motor it does get warm but not any warmer than anything else iv seen.

1
nachdM4•

Well that’s good, I’ve seen Avalon gearboxes fall apart and In your case, yours runs fine. Like I said it has its ups and downs. Like most air soft guns, it’s a complete gamble on getting a defective one.

1
HankoPanko-Crums•

The external build quality is great and the gearbox is pretty solid but magazine compatibility is not so good I had issues with CYMA mags. And the stock is pretty crap and the motor will get hot fast when shoot semi auto. But other then that it’s a great gun and I would recommend it.

3
AlmostItalianOPMedic•

Thank you. For mid caps I typically just use elite force so I’m not terribly worried they won’t work. I hadn’t heard about the motor overheating I’ll have to look into it.

2
DisastrousFerret0•

This is my gf's gun. It works. I swapped out the barrel and rhopped it. That's it. As far as mags I just use the crappy ef mid caps and it's fine on 28 and 32 g bbs. It works. It's not the best gun on the field but it doesnt break down.

2
AlmostItalianOPMedic•

Yeah I’m kinda looking for something I don’t have to mess with to terribly much (I work way to much to try and set aside time for it) and just get out and play. I typically use EF mids anyhow so no worries there. Thanks for the response

1
ash_silver1M700•

I've had one for about 15 months so far. Sold as f. It's got a elvish tac flat hop set up but before it was a prommy purple flat hop. Stock internals. 378-380 with .28s. No issues ever with it. Not a lot of room in the stock for battery's. 11.1 is the way to go with the gun. I had issues with the gb locking on semi with a 7.4. Pulled the gb apart recently just to do a health check and there was an outline where the gears has touched the piston but no wear that I could see or feel. The stock rubber does need about 1500 rounds to fully wear in tho. The stock rubber really seems to like .28 or .3 bbs. Really nice range and super flay as well.

2
ParasitischHeretic•

I own the VR16 Saber CQB, so it‘s about the same.
Great gun considering I got it for $190 out of a mystery box. Stock, I guess it’s pretty comparable to my Krytac in price and performance.
Out of the box, I’d suggest a flat hop or R hop and a Guarder tappet plate (since mine snapped). I can’t say much about the longevity since now there’s nothing stock left in it except the gearbox shell, spring guide, and ARL.

1
AlmostItalianOPMedic•

Okay thank you. I definitely will get a flat hop on it

1