Not enough space to put liquid cooler on top. What did I miss?

Build Help

I assembled my first PC over the weekend. But I didn't enough space to put the liquid cooler above the motherboard. It was touching the RAM. It's like I can put either RAM or liquid cooler. Finally, I ended up removing the fan on the back and fixed my cooler there. I moved the back fan to the top.

I am using Cooler Master MasterLiquid ML240L cooler with Thermaltake V200 Tempered Glass RGB Edition cabinet. Here is a photo where you can see that I put the stock fan on the top and the cooler on the back: https://imgur.com/a/ajZHyw3. This works for me right now. But I can't put any components on my PCI slot because of this. I am planning to add a graphics card next month.

I am sorry if this is a novice question. I know something is wrong. But I am not sure what. Did I get the wrong cabinet? Should I get a bigger one?

Posted May 31, 2020, 4:56 PM UTC

112
Scaretrixx•

Just put on the bottom

2
cryptohackerOP•

I don't think I can do that. There are no exhausts at the bottom. Also, the bottom part is separated and is dedicated for PSU, I guess: https://i.imgur.com/10Dg0Zo.jpg

1
werdna87•

Put it at the front

2
cryptohackerOP•

I have three fans that draw air into the cabinet in the front, as you can see in this product picture here: https://www.amazon.in/gp/product/B07FL1D5RV

1
werdna87•

So? According the the spec sheet, unless you have the 2020 version it only lists radiator support in the front, not top

https://www.thermaltakeusa.com/v200-tempered-glass-rgb-edition.html

2
cryptohackerOP•

Oh, so, I can just remove the fans that draws the air in and put the cooler radiator and fans?

1
Zombie_Tech•

Yup. You can also use the case fans instead of the included fans that came with the AIO.

2