Trouble Recording My First Loop
So I bought a Sony TCM200DV and a bunch of blank cassette and I made a loop with one, but I can't seem to get anything to record onto the loop. The recorder works as I was able to record onto a regular cassette with it, but when I put the tape loop in it won't record. I have tape over the tabs on the cassette and everything seems to be functioning properly, but all I get is white noise. I can see that the tape is running along fine, It just doesn't seem to want to record. Does anyone know what I'm missing?
Posted Jun 27, 2020, 10:32 PM UTC
33
The exact same thing happened to me with my first loop. It already had audio on the tape, and it played back normally. The tape also ran just fine when trying to record, but no sound would be recorded. In my case, making loops a bit looser (1/16-1/8'' longer than most tutorials recommend) solved the problem. So, you might try making your loops a bit looser or tighter and see if that makes a difference.
Thanks. I'll try making one more loose. The one I have now has a little bit of slack, I started off by making them way too tight and just kept making them more and more loose until this point. I guess I'll keep going and see if one works.
Also make sure your putting the correct side outward. Messed me up a few times