Stumped on CM upstream

Posted Jul 7, 2020, 5:34 PM UTC

Posted Jul 7, 2020, 5:34 PM UTC
UPDATE: Reprovisioned customer modem with Cox CMTS and no issues since.
Upstream LED on Zoom 8x4 cable modem keeps flashing blue or stays solid green... but all 4 US channels are within spec? Is this an modem or headend issue?
If they are changing color there is no set rule for it being the modem or the head end. It could be anything in between. The light changing color usually indicates it's not able to stay locked on to all 4 channels. A snapshot of the stats only tells us they are within spec at that moment.
The CMTS will tell you if it's receiving the modem signal consistently and clearly but you can't see that from the modem diagnostics. A historical graph of upstream over time would tell you if it's unstable and if that is the case then I would start looking for where the connection issue begins. Loose fittings, old barrels, bad tap ports, broken cable - any of these things could cause unstable upstream. Anywhere 1 piece of a circuit (cable) connects to another is a potential point of failure.
If you don't have access to any of the upstream data you could try refreshing that screen as many times as possible throughout the day to see if the power levels are changing. That would give you enough info to see if it's consistent at least lol.
It's not impossible for the modem to be bad either. Just less likely.
Good luck!
Where I’m lost is that the Zoom troubleshooting says flashing US light means 1-3 upstream channels are locked. But their web config shows all 4 are locked... https://i.imgur.com/kADIhvz.jpg had client send me a screenshot from it a few hours later and still same thing. I’ll get them to sort it out with Cox I guess
Edit: does the modem think the 1 channel with 49.5 dBm is out of spec?
49.5 may not be acceptable by the cable companies standards but it totally usable if stable. If it's spiking to a 57 intermittently that would be the reason it's blinking from blue to green. It only has to lose one upstream channel to turn colors and that can happen very rapidly if you have a bad connection. Signal stability/consistency is one of the most important things for an internet connection.
What's interesting to me as well is how high of a frequency your upstream channels are sitting on. In my system they range from 18 mhz to 38 mhz. The lower the frequency the farther it travels over distance. Now I'm starting to wonder if your cable company is using docsis 3.1 and your modem is not capable of staying locked on to those channels.I would think they would be very clear about what modems are compatible, though. Maybe call them and make sure? Edit: pretty sure I misread that. My brain added a zero lol. The upstream frequencies look relatively normal.
Is it new to the account? Sometimes the customer care adds the wrong info to register. It has to be hfc Mac.
Do you have a CATV meter?
Are you the client?
Do you have access to the tap or tap room?
Could be a few things. Even though the levels there look usable, you can get a lot more info off of a one check or other tests.
I'd try to default it and let it take provisioning again. Depending on what access you have, resend provisioning and chase it with some hits.
In my market some of our modems need to be registered by a website before any other traffic is allowed.
God speed my friend. Hope you don't have to climb in a heatwave.
Thanks for your help so far.
Not client, this is one of those “oh while you’re here...” type tasks while I was out installing some new WAPs
Modem was the only thing on the tap, straight through a grounding block to the pedestal.
Good idea on reset to default reprovisioning
Is it docsis 3.1?
No its clearly D3.0 (8x4)
So USSNR is faulty under 26dB. USTX is faulty above 53. I see nothing wrong with your US levels. So could you have a DS issue? Could there be a different issue entirely? Not enough info to say.
I reprovisioned the modem with CMTS and no callbacks since!