Can anyone tell me if this goes to an SR/F?

I found this on the ground where I normally park my bike at work. I can’t tell if it fell off the SR/F or if someone else dropped it. Any help would be appreciated, thanks!

https://i.imgur.com/C7nlzu3.jpg

Posted Jul 21, 2020, 2:16 PM UTC · edited

06
Stradocaster•

An attached picture would help :-)

6
RourneOP•

Silly me, forgot the most important part of the post, thanks!

1
ExquisiteFacade2017 Zero S 6.5•

Looks like a crush washer. These are mostly used for keeping fluids in. I believe the only fluids in your SR/F are in the brake lines and shocks. This one is probably from an oil drain bolt. It is highly unlikely this is from your bike.

3
RourneOP•

Awesome, thanks! Puts my mind at ease

2
DoctorCAD•

Looks like an oil pan bolt crush washer.

2
Hans2183•

Agree with the previous comments, this looks like a crush washer for sealing drain bolts. Nothing that is used on the Zero.

The only other option I can think of is a washer for some electronic contact. Other than that there is no reason to have it in copper which is a more expensive material than the plated metal washers typically used for mounting hardware. But I haven't seen such a washer on the zero either, at least not on the 12V system. And if it was from an electronic contact I don't see how it would get disconnected and if it was your bike should fail. Really stretching it here :D.

2