r/tamiya•
Vertaix

Buying a New frame. TT-02.

Foks, i need your help. Im fairly new to rc, and looking to buy some nice stuff. Now as a huge toyota fan i saw the Yaris wrc kit, thats sitting on a TT-02 frame. After doing some research i found out theres quite a few different versions of that frame. My first instinct was to compare inventory lists, but goddamm thats a lot of slight variations.

Now, i have narrowed it down to the following of 4. Stock TT-02, TT-02R, TT-02SR or the TT-02RR.

I will drive it mainly for fun and show, and will be sitting most of the time with my other model cars. (not rc). Grond wise will mostly be asfalt and bricks. Would be nice if it could run on sand / mud without dammaging the internals.

What would you guys and girls advice? Go with one of those 4, or something else entirly?

Posted Jul 22, 2020, 11:04 AM UTC

78
kevinatfms•

I would go with the regular TT02 and budget for 2 items - bearings and oil dampers. Everything else is just fine for what you are going to use it for.

Fast Eddy has bearing kits for under $20(use discount code) and a set of Tamiya oil dampers are $23(part number 54753).

6
CloneWerks•

Absolutely agree with this, the ball bearing set is a must to keep things running smoothly and cool, and you really have to dump the pogo sticks (friction shocks) and get oil shocks to get any decent handling

See demo. https://youtu.be/nXh-F-NNCzA

2
VertaixOP•

So after more research and watching that vid i think ill get the yaris kit, with upgrades.

Defo the springs, bearings and driveshaft. Still wondering if the steering set is going to be worth it.

Also the engine cooling needs to be on point.

As far the differences between the sets. The stock, r and rr are fairly similair in parts, with upgrades here and there. The sr is a compleatly different story all together, bu nearly dubble the price of the yaris kit.

Seeing how i will still need the controllers and all the additional stuff, the sr is going to be to expensive for now.

On the required extra's, whats recommended? Before i go into another week long research stint on what the best bang for buck.

1
blahpblahpblaph•

The aluminum steering set and driveshaft are also a great upgrade. I just put them in my tt02b.

2
RCsRCCars•

Get the Yaris kit which will be a standard TT-02. Add a couple hop-ups. Catch the bug and eventually buy all of the TT-02 variants. That's where I'm headed.

2
ketamineandkebabs•

I haven't had the tt-02 but I have had a couple of tt-01's. The cheapest one is just that, they don't come with bearings which you want. They also come with cheap shock/dampers that aren't that great over even a slightly uneven surface. And the diff on them is rather basic.

Looking at the spec for them and what you want it for I would go for the s or sr. You can always hop it up if you get the bug bad.

1
McPorkums•

If you want to be able to drive on dirt/sand, might I suggest checking out the XV-01 chassis? It's an enclosed, belt-driven drivetrain. The XV-01 Lancia delta body is gorgeous, though there is also another version with a Subaru Impreza hatchback. It's more expensive and doesn't come with the electronics that most Tamiya kits provide, but you get oil shocks which add an immense about of handling capability and less bouncy interaction. When it comes to bodies, There will be tons of bodies that will work with the XV-01. I always suggest to people getting into the hobby to focus on the chassis first and then have a blast with different bodies (For instance I have a VW Beetle Slash body on an Axial SCX10 crawler). If you need any other help, make sure to also check out r/rccars and of course feel free to PM me with any questions if you like :) Good luck! :)

1
jollyGreenGiant3•

You'll almost have to soup up the steering, it's not good out of the box, they don't go straight enough for a big motor and battery.

1