Is there any 3d inline clip for nerf knockout?
I'm searching for it and the closest one is still need brass barrel. I can't get brass barrel since it's not available in my country
Posted Aug 15, 2020, 7:17 AM UTC
213
You can make one out of 1/2 in PVC and CPVC, I did and it works pretty well.
2
I've read your comment and I search for 1/2 inch cpvc pipe but I can't find it on my local online store. But I find 1/2 inch PPR pipe instead. Will it works?
1
Use brass. It works.
0
Any full length online clips?
1
Just make it longer.
1
Wouldn't work, as threads would be distorted
1
What threads? And by "make it longer" it doesn't have to mean "stretch the x axis" it can also mean copy and paste in more sections of the mag tube.
1
That would screw with the internal dimensions.
1
Can you get polycarbonate tube or pvc? You could build a TKO. There is a 3D printed clip somewhere as well but you still need a barrel material
I can't get any tube for the inline clip, the size that I needed to build TKO is not available on my country online store. All I can is just do some 3d printing, is there any 3d design of the tube? Or should I just design some cylindrical tube with the specific size of the TKO?
The trouble is that 3D printed tubes have lots of friction and a bad air seal, maybe go to the hardware store and see what fits snugly around a dart
Okay then, thanks for the reply
No problem, hopefully you find some barrel material