Equipment Q: Surface Supplied Setup using Tanks
Greets,
Pondering a fresh setup for diving Sea Cucumbers in the PNW. The specific fishery is designed such that we have a 7hr day & a 4hr day the next day. Maximizing bottom time (our crew always stay no-deco) is high priority. Thus far its all been done hookah style - something akin to a brownie or any of the other low pressure compressors.
Nitrox has been on my mind for obvious reasons, but the complexity of a low pressure compressor with active Nitrox mixing coupled with a tender operating a small skiff and all the other duties at any moment... it's just a bit much. So retrofitting our current setup with Nitrox is out of the question as far as I'm concerned.
Lately I've been pondering the notion of running Surface Supplied but switching from a low pressure compressor to high pressure tanks. Although it'd be annoying to have to go to the diveshop for fills - I think the tradeoff is worth it. Can be diving a known EAN mix that's been tested & confirmed, thereby reducing the load on the tender as compared to a compressor & active mixing. Much preferable, much less complex.
So anyways, I've been having a hard time finding materials & examples of this sort of rig. Maybe my Google query skills are rusty?
I see interspiro makes a manifold & hose setup - the high pressure hose all the way down is VERY appealing in this arrangement because I presume that allows the diver(s) to use a proper dive computer, whereas low pressure there's no path for active monitoring down below. Again, the less active responsibility on the tender the better far as I'm concerned. Not crazy about a topside person trying to pilot a skiff while watching a pneumo & tracking a dive profile.. Really prefer it to be right there on MY wrist.
Are there other examples of high-pressure setups like that?
Anybody know what the interspiro unit runs price wise?
Any resources you could point me to regarding equipment choices along my stated path?
Posted Aug 27, 2020, 3:30 AM UTC
is the intent to use the nitrox to improve safety and also relieve any possible subclinical dcs fatigue? if so, just running a continuous blend with a CMF needle valve and inline o2 sensor on top of your existing hookah system should be sufficient.
if you are still staying within NDL limits for air, no real need to change the dive profile tracking. wrist dive computers do not need a high pressure hose to function.
if you are going to use the nitrox to increase NDL time, then you need an accurate mix readout which would either require an o2 monitor akin to a ccr head unit or running a set mix. but hauling enough tanks is going to be annoying for a set mix.
Increased NDL time is the goal. Oftentimes we're passing up good harvesting because the extra 10-15' of depth isn't worth the tradeoff in terms of reduced bottom time. We're allowed a set amount of time to harvest 2 days a week and that's it.
Likely we'd use tanks far larger than 80's, but I understand your meaning re: annoying to haul.
how big is your boat? a possibility is to stick hp banks on the boat and then refill back at the dock.
18' skiff tenders the two swimmers during the dive days (infinitely more maneuverable as we sometimes cover alot of ground), but our 48' Seiner is always anchored nearby.
Definitely, if we go the tank route that's exactly what we'd do - high pressure bank on the big boat
installing a membrane system on the 48' seiner may be an option instead.