Buying a mod for DVT4

What Should I Buy?

I’ve been looking around the sub and noticed the general consensus is the DVT4 atomizer would be my best bet as far as that goes. I’ve seen a couple mods linked but I’d prefer one that has a built-in battery.

I came across the Aegis Mini and the Eleaf Pico. Am I understanding this right that if I purchase one of these mods and the DVT4, I’d just have to add the wax or shatter then I’d be good to go? Any links or advice would be appreciated. Thanks!

Edit: Forgot to add that I’m currently using a Puffco Plus. Not too happy with it..

Posted Sep 5, 2020, 12:16 AM UTC

311
Lazy_Schrady7•

I have a Drag 2 mini with a built in battery that’s not bad with the DTV4 and I also have a Pico 75w I use with it.

I have another 75w Pico with a battery and wall charger I’m selling over in r/ecigclassifieds if you’re looking.

3
cool_haircutDTV4 + SiC Cup•

wismec gen 3 will likely be the best bang for your buck if you can find one in stock. single battery devices die quick with the v4, so i don't suggest the pico or rim c but they'll be fine for a starter device.

https://nfeteam.org/

you can find a list of Arctic Fox compatible devices at the link there

2
shadowedashOP•

I looked up the Wismec.

Is this all I would need?

1
FrankChaise•

The Pico doesn't have a built in battery. I can't think of a mod with a built in battery but regardless you want something you can change the battery. Consider smartphones, usually the battery loses capacity faster than the processor slows from updates. With mods the processor will never really be taxed by updates so you want to be able to change out the battery when it stops holding a charge.

It's recommended to get an external battery charger (Nitecore makes cheap good ones) for safer charging. Mods can do pass-through charging but there are some safety risks. Also external chargers do a better job of slow charging to maximize battery life.

I have a Pico. I run a Sai, a DC Gen 2, QQNE, DTV4 on it and have no problems with battery life. But I'm not a heavy user. The Wismec Rouleaux Gen 3 Dual is recommended a lot for a dual battery mod. You can't go wrong with either of those. And they are both very affordable.

Pico can be found on ineedhemp.com. Good price and can be bought with the DTV4 kit. THANKYOU10 for 10% off.

HumboldtVapeTech.com has the slightly different version of the Pico. Also good price and they sell Nitecore chargers on that page as well. I believe they have some coupons too.

2
shadowedashOP•

One thing is how easy are all of these to load? I suffer from tremors and anxiety so my hands will shake from time to time.

1
FrankChaise•

The crucible is pretty large on the DTV4. Hooked to a mod like the Pico or the heavier dual battery mods you can set it on a table and it will be very stable. That might help with loading. You can use one hand to hold your other hand steady.

2
shadowedashOP•

So, I’m thinking buying this and a DVT4. I found these 2 but no idea if the seller is reputable or what else I would need.

This Wismec

Or this Wismec.

And I assume I’ll get the DVT4 from their official site.

Really appreciate all the help

2
slapnutz40•

You may also want to look into getting a BB and use it like a rig

1
a_lilstitious•

Crumbly stuff works best. Sticky stuff can be a pita sometimes. If it’s real sticky, I just heat the bucket up a bit a stick the tool(make sure not to hit fire button while doing this) to the bucket and let it melt.

1
sporkandknives•

i have the drag 2 mini & it runs great with the Ti cup as it needs less heat up time than the quartz cup. built-in battery because i didn't wanna deal with lithium batteries & chargers.

1
khabur330162Multiple Devices•

Wismec Mini. Runs arctic fox.

1