I tried with 25mm fans and it’s just too tight. The plastic clip/support plate on the front panel were modded or removed you might get enough space. I wouldn’t recommend doing that due to the questionable airflow that the case already has. You can do push/pull with a 40mm rad on the inside of the front panel. Iirc the spec sheet says you can put up to a 60mm rad in front and then add a fan as well.

Hey guys! So I was thinking of doing a push/pull set up in the front with this case with a 360 rad but was wondering if there was enough clearance for fans to be mounted right behind the front panel with my rad and other two fans on the other side. Granted, I will be removing the dust filter for extra clearance if necessary but I was wondering if it was possible at all.

H710 owners! Got a question about fan clearance behind the front panel?