Beko WM5100W clicking on slow spin only

Thank you for your submission! If you posted your machines model number, you're good to go. If you haven't, please do so ASAP. You can either edit your post, or just drop it in the comments.

If you can't locate your model number, posting a photo of the machine is the easiest way for us to help you locate it.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Sorry if this has double posted but the app threw an error first time I tried to upload the video

I have no idea how old the washing machine is as it was left by the previous resident but the click has recently gone from the occasional single click to more continuous noise. I'm not sure what the noise is and it's an under counter machine that I can't quite seem to get a good enough grip on to pull it out and check round the back.

I've checked to make sure nothings caught in the drum or seal. It looks like the door seal has been replaced at some point as the retaining band is not seated properly at the the top of the door. There is no up and down drum movement and the drum spins freely but there is alot of backwards and forwards movement. The noise is only present when the drum is spinning slowly with laundry present, once its gets to a higher spin the noise stops. With heavier loads it can seem like the motor is struggling to start as there is very distinctive long hum before it starts spinning. I can not replicate the clicking noise by spinning or moving the drum and the noise was not present when running a spin test.