No Stupid Questions Thread - Week of 2020-09-07 - 2020-09-13
The only stupid question is the one left unasked!
Do you have a basic question you want answered? Let us help! Remember that r/livesound is for PA/sound systems/streaming -- we may not be able to be as helpful with questions about, say, home theatre systems. Keep in mind that the more information about your setup (amps, speakers, mixer, microphones) you can provide, the quicker we'll be able to help you!
Posted Sep 9, 2020, 5:22 AM UTC
53
I have a basic harbinger m120 PA system. I need more sound so it was recommended I buy a self powered speaker and use RCA to XLR to send the signal without loss of power to the m120. I haven't cranked it all the way but it seems like the initial volume in the Self Powered speaker is dependent on how loud I have the m120. Am I doing something wrong or is this accurate?
Tough situation because the m120 system is for inside a barn at a wedding and the self powered will be run to the outdoors area, so I probably want the self powered to be a little louder. Thanks!
Yes, the RCA output on your Harbinger mixer does not have independent level control. Your powered speaker probably has a volume knob on the back. You can use that to make it a little louder relative to the passive speakers.