r/ender3•
schmidit

Just got my school to buy three Enders for my classroom

I’m an engineering teacher and got my school to buy three ender 3s for my classroom rather than one Dremel printer.

I have an ender at home that I love. What mods do you recommend to make printing easier for students?

Posted Sep 12, 2020, 1:37 PM UTC

2317
Jackprot69•

whatever mods you have on your printer at home.

glass bed for sure.

5
c0rn3rphr34k•

I‘d recommend putting bl touch on these, saves a lot of time otherwise spent leveling the print beds. Plus filament guides to reduce the wear on the plastic extruder frames.

5
Kyleb100•

Bed springs

5
JPicassoDoesStuff•

Build enclosures to protect them from clumsy/careless young people.

Printing the filament guide, air duct, etc. that they can install on the printer is fun for teaching you can print things almost as useful as a fuktopus.

3
Nimbian•

Metal extruder. The plastic ones will break.

3
AdmirableVanilla1•

Great job!

2
potatoooeee•

Yellow springs/Glass Bed/Capricorn tube

2
thedragonlizard•

I own a 3d45, and too be honest I use my heavily modded ender way way more. So good call!

2
Papfox•

My favorite upgrades for mine are:

BMG extruder (clones are fine if the price of a genuine one is an issue. Make sure the clone has a screw in coupling) - loads of feed torque for fewer clogs, much better adjustability of the filament grip force and they don't mash the filament anywhere near as much as the stock metal extruder so you get less feed jams.

Hero Me Gen 5 cooling system in the 5015 single blower dual duct config (print it yourself. You only need to buy a new 5015 blower - the stock single duct 4010 part cooling blower is pretty ineffective)

SKR E3 Mini v2.0 main board. Much better board (32 bit). You get the Trinamic TMC2209 driver chips which make the steppers nearly silent (great if you're trying to talk to your students without having to fight the noise of 3 sets of steppers whining.) It also has a much better SD card slot that your students will find it much easier to get the cards into without missing the slot and losing the card inside the printer. If you can run the extra budget, the matching colour touch screen is really gorgeous, nice to use and gives you an external SD card slot and printing from USB sticks which you may find more convenient than tiny microSD cards floating around the classroom. The touch screen's SD card slot is also full-size SD so the cards are easier to handle and less likely to get lost/"borrowed" by students for their phones

Magnetic build surfaces - much more convenient than clips that can be lost or snag the print head if they're placed wrongly.

Auto bed leveling and yellow springs/solid bed mounts - better accuracy and eliminate all the print failures / bed damage caused by inexperienced users leveling the bed inaccurately

Airtight containers and dessicant packs for filament storage - avoid degraded filament ruining your students' prints

2
INTPx•

Skr e3 mini with tmc2209s. Upgraded extruders (the all metal dual gear knock offs are crap in the long term). Lots of 0.4mm nozzles. Lots of painters tape. Lots of silicone socks.

2
schmiditOP•

I’m back and forth on The glass bed with students. They stick better but it’s also much harder to get finished prints off of the bed.

1
LyraNgalia•

Why not mod one or two with the glass bed and leave the other(s) with magnetic? Let your students figure out which they like better, and it gives them an opportunity to see in real time how little changes to their machines can affect print quality

2
schmiditOP•

That may be the trick. I’ve got a makerbot in there already to let the students compare different printer types.

1
irrelevantspeck•

This may be really terrible health and safety wise, but I have an air duster which effectively freezes and contracts the bottom of my prints, which makes removing prints extremely easy

2
they_have_bagels•

If you let it come back down to room temperature, they're not that hard to remove. It's that wait that's hard, though.

2
ikeliketocreate•

Do yourself a favor and get a $30 pei build plate with a included magnet spring steel. I have two ender 3s and a sidewinder x1 for my small business. And it literally is the best UPGRADE EVER. Prints stick everytime. And I was so skeptical of it making the big of a difference, but it really does. Finish is ultra smooth also.

1
Technomancer5•

Metal extruder arm, capricorn tubing, and get some extra nozzles and maybe a spare hotend or two. Better springs and a glass bed would be good as well, and maybe a BL touch to save some time with leveling.

1