how to power an automated coffee roaster made from a popcorn popper with 1 single outlet?
Hi, I have a project that I'm starting to put together based of the hackaday coffee roaster (link below). I wanted to power it from 1 single outlet, I was going to purchase a small 24v dc power supply for the dc motor and a buck converter to bring the power to 5v for the arduino for the relay, the thermocouple and the mosfet. but instead of powering the heating element with a seperate power plug could I not run a both the heating element and the powersupply off the same wire?
here's the 2 options I was thinking off doing: 1.power strip with 2 outlets, one to psu and the second to the heating element. that results in one power plug out to the wall.
- power plug to +, - and ground terminals on the psu, then daisy chain the heating element off those same terminals on the psu.
I'm pretty sure i should not do the second but I don't know why.
https://hackaday.com/2018/01/23/build-an-excellent-coffee-roaster-with-a-satisfyingly-low-price-tag/
Posted Sep 14, 2020, 9:33 PM UTC
Like u/Psycrotes said option 1 and 2 are the same. Just make sure the wiring you are using to go to the wall is rated to handle more than the current you'll be pulling and not some dollar store crap :)
Any decent power strip or extension cord will be 12 gauge wiring which handles about 20 amps IIRC, more than enough considering your circuit breakers are going to likely max at 15-20amps anyway (assuming you are in the US).