Which specific parts can be soaked in alcohol on a V4?

Took everything apart. I’m assuming the quartz cup (with donut and spacer removed), bottom piece, and mouth piece. Anything else?

Posted Sep 17, 2020, 5:21 PM UTC

210
stick267•

i soak everything except the o-rings and heater/wires. doesn't take more than 10-15 mins

2
shadowedashOP•

Got a better way to take the o-rings off? Pain in the ass.

1
stick267•

don't know how to explain, but i just pinch them and they come right off. i'd make a quick video but my hands are freshly lotioned lol

1
Phix420V4 SiC•
1
JakeismaximusV4 SiC•

Some curved tweezers helped me. Just be careful because they get sharp and can slice an oring with the quickness.

1
potadelphiaV4 SiC•

Just avoid anything that has any rubber or plastic component. If you want to soak the base, remove o rings and the 510 thread and plastic pin at the bottom too.

1
shadowedashOP•

I see now I can unscrew the line pipes inside the mouth piece. Do I have to take those out or are they good to also be soaked?

1
potadelphiaV4 SiC•

Those can be soaked. I’ve never taken those out though lol. Also how dirty is your setup that it needs a soak? A wipe or qtip with IPA is fine if it’s a new instrument clean.

0
shadowedashOP•

It’s not crazy dirty but I’ve had it about 2 weeks and haven’t gave it a deep clean at all yet. I also just received the Ti bucket and want to put it on the V4 while it’s nice and clean.

2
fishinfool88•

Mines seen atleast 300 grams of concentrates now, quick wipe with a prep pad is legit all that's needed. The glass rigs are 2000x harder to get clean, so I rotate them out often and clean those more.

1
ghostx562Quartz Quest•

v4 cleaning & assembly

This should help you out.

1
Phix420V4 SiC•
1