r/handtools•
Shworn

I finally got to use all 3 hand planes yesterday

Finally got to flatten a workpiece using the 3 different types of hand planes yesterday: Jack, jointer and smoother. My god. First of all, I’m a mad man for trying to flatten without a jack/scrub this entire time. Second, there hasn’t been a better feeling in my woodworking then when I took my #4 to the properly flattened piece. The pure joy I experienced taking such a fine, full length shaving is indescribable

Posted Sep 30, 2020, 12:26 AM UTC

728
MechanicalRooseter•

Ah that’s exactly what I’m wanting to try! Excellent. I’m excited by your excitement.

I’m someone who’s taken up the bevel up jack plane route aka get a few blades and expect it to do everything. I’m so curious to what that perfect #4 shaving feeling is like (or why I need that #4)

5
Flerpinator•

I've got a really crappy #4 that I got started with, and upgraded to a Vertias bevel up jack. So long as the blade you're using is sharp and doesn't have more than a whisper of camber on it you can get just as fine a shaving from a long plane as you can with a smaller one like a smoother. I use the jack now for everything, a blade with an aggressive camber for hogging off, a slight camber for trueing and a flat one for smoothing, and it does a pretty good job at all of that.

On longer boards I'd like to have a jointer to for sure. It's not needed on most of what I do, but on the occasional larger project I do wish I had a nice big dobber but I make do for now.

And somewhat unintuitively it's also the longer boards that make me wish I had a nice smoother. Sometimes the jack is too big to smooth slight hollows on large pieces that don't need to be dead flat. A smaller plane would get a nice finish without having to flatten the whole thing down.

But as for fine shavings, yeah. Any plane can get you something a fraction of a thou if it's well tuned, I should think.

3
luizeco•

It's very inique experience, almost that you feel yourself someone that know how to use a tool, and, the most desirable ones, handplanes.

2
urbansasquatchNC•

That sounds delightful. I've got a low angle jack and a number 8, so I basically use the 8 for everything but roughing right now

2
OddInstitute•

Congratulations, it feels very nice! (And so much nicer when you have really aggressive tools for the rough work instead of planing all day)

2

It’s a real eye opening experience isn’t it! Make yourself a dedicated scrub plane and you’ll be amazed at how fast you can hog waste away.

1
tolndakoti•

I just used a #7 last night for the first time. Love it. I don’t have a smoother though. Just a no. 5 1/4 and a no.5 low knob.

1
ShwornOP•

I’ve been using a 21 inch wooden jointer, a 5 and a half transitional with a heavily cambered iron and my Stanley #4

1