Build Help for CAD and Gaming
https://pcpartpicker.com/list/86XNGq
Hello! Welp, looks like my University will be going online again due to Covid. Time to build a PC! The attached link is what I have tried configuring so far, and I need some advice if these are good choices, and if now is the right time to buy. I also need help trying to save some money, I think I am overspending on the motherboard, though I do need the wifi compatibility. I would also like to try to save some money on the PSU, and I also would like to address the compatibility issue with the case. It says that I will have usb ports not working with my setup, is there recommended case that will have at least one working usb port? I just know I am too OCD to have a dead port on the front of the case haha.
This is my first time building a PC so I would appreciate any advice, recommendations, or criticism! I would like to be able to run games at 1080p with a 144Hz monitor, and I would also like to be able to use Solidworks and any other CAD programs comfortably. Thank you for your help!
Posted Oct 13, 2020, 8:46 PM UTC
I'd note most CAD programs really benefit from a larger screen. Having used Inventor at 4K there's no going back!
Agreed, at work I use a 1440p dual monitor setup for Solidworks! So much better than working at 1080p on a single screen. My home setup will be a downgrade from that, but as long as I can do some extra work at home it doesn't need to be my main workstation so I can try to save some money at first, and then upgrade down the road. Gaming, school, and some extra work stuff is what I'll need.
Fair enough.
Agree the mobo seems overkill to me. Only other thing I'd change is the cooler - certainly in UK prices you can get a top line air cooler (quieter, as effective, and probably more reliable) for a fair bit less. Personal preference though :)
Agreed, I will definitely look more into a CPU cooler. I am a big fan of the h100 series since it stays mostly off of the board, but that's really just looks. I do not care for RGB and may even go for a case without a window, so that may end up getting cut. Thanks for you help!