r/techsupport•
Hthen

Unable to get into M2 ssd using enclosure plugged into computer?

Open | Hardware

So I have an SSD from my old laptop I wanted to get files off of so I got this: https://www.amazon.com/gp/product/B07MNFH1PX/ref=ppx_yo_dt_b_asin_title_o00_s00?ie=UTF8&psc=1

To do that.

I got it today and I just can't figure out what I am doing wrong. I don't think I bought the wrong enclosure, as mine is definitely 5 pins and it fits in there just fine.

But when I put it into my computer, it makes the sound like something was plugged in, then nothing happens. It shows up in devices and drivers but the only thing I can do from there is look at its properties.

Nothing pops up in my drives except the usual one on this computer.

Edit: It does show up in disk manager but it says it is unknown and unintialized. If I try to initialize it, it says request failed due to fatal device hardware error.

Edit2: Tried download Easeus data recovery, the drive doesn't appear there at all so no dice.

Posted Oct 14, 2020, 2:42 AM UTC · edited

14
CaptainSpankJarrow•

Try to see if you can get it to open in diskpart. There are various tutorials on how to use diskpart on here and YouTube/ tomshardware etc. If it doesn't show up there, make sure your drive is the nvme m.2 instead of the Sata m.2

1
HthenOP•

I was able to get it to pull up in diskpart, but not sure what to do next. I read through the commands, and looked for some guides but everything I am finding is about how to erase the drive, can't find anything about just getting access to it.

1
CaptainSpankJarrow•

Type disk partition in the search bar and click on repartition drives, from here you can see how the old drive is called. Chances are the drive letter on the m.2 is the same as a drive on your current laptop/PC. Just change the drive letter on your m.2 and see if it works

1
HthenOP•

I am not sure what you mean by clicking on repartitions dive, as its just a cmd type thing. I have the disk selected as the focus and I check the partitions on it, it just says there are no partitions to show. Also tried just initializing here but it just gives the same fatal hardware error, and event viewer give me event ID 154.

1