2005 Kawasaki Vulcan 750 Clutch not disengaging
So I just put the bevel gear cover back on, and the clutch doesn't seem to want to disengage. The photo shows the position with the lever squeezed. I also tried using a wrench to manually pull the lever here farther than the handlebar lever goes, and no change in clutch. Any ideas? Maybe something happened on the inside? This lever is hard to pull as you would expect. The rod inside never came out. It worked fine before.
The manual says that the clutch should start to disengage after the notch on the bottom starts going past the notch in the top in this photo: https://pasteboard.co/JzhPN39.jpg This is a 2005 VN750
Posted Nov 7, 2020, 5:28 PM UTC
21
Thanks for posting in r/Fixxit, the motorcycle repair subreddit. If you forgot to put the Make, Model and Year in the title, please reply to this comment with your bike's details. In the meantime, Here's some great resources for common problems posted here:
-Trouble starting? Revzilla - Battery testing
-Carbs running rough? PJ motorsports - Carb Troubleshooting
-Wiring diagrams for beginners - Dans MC - Reading Wiring Diagrams
-Identifying part numbers - CMSNL (EU) Bikebandit (US)
I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.