r/buildapc•
tookwik

Trying to upgrade to new 3070 wont boot up.

Troubleshooting

Please help. I am having a lot of issues trying to install my new graphics card. Here is my build:

  • NR200P case
  • Asus X570-i motherboard
  • Ryzen 5 5600x
  • Asus Rtx 3070 KO (upgrading from 2080)
  • 32gb Silicon power 3200
  • SF600 platinum
  • Coolermaster 240 aio cooler

Problem:

When I install the 3070 graphics card, my mother board shows a white light indicating no display. I tried HDMI and display port but nothing works. All the fans and lights are on when I push the power button and it remains on until I power them off manually. I spent several hours doing this and couldnt get it to work, here is what I tried:

  • Did DDU as suggested by alot of others

  • Removing graphics card and powering on = no boot (as expected since 5600x doesnt have integrated graphics)

  • Plugging in my old graphics card will boot it but for some reason only hdmi port works now and display port isnt working? Also its not showing 144hz on my screen now.

  • Removing both sticks of ram and switching the spots. Using new graphics card but no boot up. Lights and fans spin but displayport/hdmi doesnt work. White light is on for motherboard.

  • I gave up and now i'm using my 2080 for the time being and am stuck on 100hz using hdmi cord. I'm not sure why the display port isnt working now and 144hz isnt showing up.

If anyone has any ideas, I would greatly appreciate it. I'm a newbie so its just really overwhelming. Is there a chance my 3070 is doa? The fans spin and the lights turn on though. Thank you all for any suggestions.

Edit: Figured out why the 3070 wouldnt work, I had to go in to bios and set Pcie to 3.0 instead of 4.0. Apparently its an issue when combined with the pcie riser cable in the NR200P. Hopes this helps someone. I still dont know why my display port isnt working. Only 100hz max atm instead of 144hz. If anyone has any suggestions, please let me know!

Edit 2: Fixed the displayport issue by using a different displayport. Not sure why the top one isnt working but the 3rd one is. Hope this helps anyone with similar issues.

Posted Nov 24, 2020, 12:23 AM UTC · edited

21

Similar thing happened to me with a 3080. Except it would boot but in Windows the video card would have an error on device manager and it didn't work properly. Switched to pcie3 and it's fine. Also using a pcie extender.

You may want to make sure your dp cable is good for the trees res and Hz your trying to run.

1