100% Pure tung oil for maple cutting board?

I’m making a 13.5”x25”x1.25” maple cutting board a friend’s wife requested for him to cut his smoked briskets on. Im knew to cutting boards, I’ve used walrus oil on other boards but I’m not sure what exactly the process should be. I was thinking of tung oil to darken up the maple and was planning to wax after, but from what I’ve seen on here so far it seems it’s all about mineral oil bath and wax, using different woods for contrast or color. Is tung oil as a base and wax on top doable or should I stick to mineral oil and wax?

Posted Nov 28, 2020, 3:43 PM UTC

25
BiggyShake•

Is tung oil food safe? Probably not but I'm not 100% sure.

Edit: if it's not DON'T USE IT. Even covering it in wax won't help since the wax will wear off during normal use.

4
LHT510OP•

From what I’ve found It’s food safe when it’s 100% pure, but could have an effect on people with nut allergies. I’m more wondering about wear and tear, she isn’t worried about the possibility of a nut allergy

2
DriftingNorthPole•
  1. A board that big (25*13) is way to thin at 1.25. You need to be at 2" minimum, preferably 3. The longer and wider, the more the wood is going to move over time, and the more sensitive it's going to be to very minor changes in temp and humidity. Big boards will turn into a bannana if you just look at them and drip a tear on them worrying about wood movement. Think about the surface area of all your glue faces in something that big. You have a lot of longitudinal surface at 1.25 inches, but very little vertical. Understanding you may have a wood budget, I, in the past, have sacrificed dimensions to gain even 1/4 inch thickness.
  2. Bump on mineral oil and wax. You want something they can maintain in the kitchen, not have to take out to the shop and let cure for 6 days each time they oil it. Pure Tung Oil is also expensive AF, which is the only kind of Tung Oil you can put on a food prep surface, and is hard to find one that is not labelled as such, but is in reality something else. Mineral oil is 3$ at CVS for a year supply.

-Brought to you by this sub's Wood Movement Police....

3
LHT510OP•

Thank you sir

1
Lie-Nielsen•

I use walnut oil.

2