r/buildapc•
Dragull

A nightmare with my new PC case. Deepcool Matrexx 55 Mesh.

Okay, story time:

So, after building a budgetish PC a couple of years ago, I decided to finally upgrade it's case, since my old one, quite frankly, it sucked. I bought literally the cheapest case available when building it (converting local currency to dollars, would be like 15 bucks... lol).

Anyways, after reading about cases and looking for what was available in my country, I decided to go for the Deepcool Matrexx 55 Mesh + 3 rgb fans (cuz why not). Even thought this particular model wasn't review, it is somewhat similar to the SilverStone FARA R1, which Steve, from GamerNexus (shout out to shout out to u/Lelldorianx) chose as best budget case of 2020. And for the price point, I couldn't really find anything much better.

So the I buy, case comes and I rebuild my PC in it. Not amazing cable management, but decent enough. Then, I plug the PSU, turn it on and something strange happens... the computer boots up, then it turns off suddenly (after about 2 or 3 seconds). I press the power button and nothing happens. FML

Anyways, I tried to exchange RAMs, doesn't work. Exchange PSU to one I have spared, doesn't work. Tried to remove my GPU, same stuff. At this point I'm starting to get desperate thinking I maybe broke something in the motherboard? After some google research, some sites say this could be an issue with the motherboard battery. I tried that and guess what, didn't work.

After about idk, 4 hours of trying stuff, I decided to learn how to turn on the PC without a front panel (and this is where I learn that what triggers the boot is just a quick short between 2 pins). Guess what, the PC boot up flawlessly. Damn, something is wrong with the case front panel!

So what I did next was, instead of pluging the "Power SW" in the power pins, I decided to plug the reset button... and it also worked! The reset button was working like a flawless power button. Conclusion: power button or power SW is fucked.

I really didn't want to return the case (bought it online), so I decided to investigate it further. I noticed that the wires that go into the button are pressed against a metal screw/plate (that actually serves to hold the back of the button and makes it "click", hard to describe, wished I had taken a picture). I remove this screw and notice some small cuts in the cover of both wires, making them exposed/bare! So the only logical conclusion is that the wires were touching the metal screw, creating a constant "short circuit" in the "power SW". I managed to "fix" it by putting some eletrical tape over the wires (3 layers lol).

Happy to report that now the pc is working pretty well. That said, I find it unacceptable that a case that I paid equivalent to 70 dollars have this type of flaw (potentially damaging to the motherboard maybe?). Actually it should be unacceptable in ANY new case, but this is the type of thing I expected from my 15 dollar case, NOT THIS ONE! I understand that this is "budget" product, but that's no excuse, a case should be functional first and foremost. I cannot recommend this case to anyone, unfortunatly. I just hope Deepcool improves it manufacturing process in the future.

TL,DR: power button from the case had a short circuit due to "bare" wires, took me hours to figure it out.

Posted Nov 30, 2020, 9:13 PM UTC

20

No comments yet

Nobody commented on this post, or the comments weren't captured.