leafcutter64OP•

I saw a lot of posts saying the Q-flash plus doesn't work or was terrible to deal with for folks who got their B550 or B570 boards and just had a Zen3 on hand. It was the same for me -- didn't work. I tried three different flash drives (all USB 2.0, 4/16/32G), and renaming and everything (just like the other posts on this sub instructed). I got an Aorus B550I Pro AX from the SN2037 batch, and so, just missed the F10 bios update being shipped on the board by default by a few weeks.

So, on a whim, I put everything together, stock cooler for now. And, it booted into bios! As expected it had the F3 bios. I plugged in one of the flash drives which had the F10 on it, and updated to it. Done.

1
snorlax0117•

Which bios did you flash? Mine is stuck on a boot loop with a 3600x. F11k is the bios I used

1
leafcutter64OP•

F11k is a beta version bios. Hence, the letter series after the number. I flashed the latest release version F10.

2
ChrisIQ145•

Hey, i have the same board & processor here and will start my build in a few days. Do I get you right, you put everything on the board (CPU, RAM and GPU) and were able to boot into BIOS?

1
leafcutter64OP•

Yeah, that's what worked for me. Couldn't get the unbooted bios flash (Q-flash plus) to work. Had to power it own with all parts in.

1
MordenIsAlive•

Before formatting fat32 did you do a diskpart clean on the usb drives? That command will fix all sorts of problems with partition table incompatibility by erasing the entire partition table itself. Deleting them in disk management isn't the same.

1
BuckleMyPoo•

Can I ask where did you get info regarding the batches? Wanted to see if my SN2047 batch comes with the F10 BIOS.

1
leafcutter64OP•

I read somewhere that the serial number is of the form SNYYWW, where WW is the week of the year. So, if you have the week-47 batch, then you'd already have the F10, from what I understand.

1
BuckleMyPoo•

Wow, thanks! Preparing for my build and was reading up on the QFlash issues. Glad I don’t have to worry about that possibly happening.

1
yeahhh-nahhh•

Same thing on my B550 Aorus pro, was able to load into bios with a 5600x and flash to the latest bios.

1
YawYo•

Did you flash from F10 and do it through the boot screen in BIOS or just through the back with the systems power off and click the qflash button below/above the USB stick? Asking because I'm about to do the BIOS myself. I need to have my stick reformatted FAT32 and thats it eh?

1
1stitchintime•

Great. Thanks. Got my 5600X working on my Pro AX.

​

Side question - do you know where the Temp 4 sensor is? It's consistently around 20 degrees, while everything else is 40-50 degrees, and it doesn't show up in SIV.

1
shintoph•

Thanks! I have the F2 bios and updated to F10 which found my 5600X.

1