r/ploopy•
11fdriver

Ploopy Review as First Trackball

TL;DR: I love this trackball! I have some issues with the scroll wheel, and some suggestions, but it's the first trackball I've owned and I don't think I'll go back to a mouse anytime soon.

I meant to post something about my Ploopy trackball a long time ago, but I've not had the time to sit and put my thoughts together. I've now had it several months.

Assembly was easy and enjoyable. While I have soldering experience, I wouldn't be concerned about recommending this to someone who hasn't soldered much before. I chipped the the left-click button, but this was my error when attaching the top shell.

Initially, I was slightly disappointed by the smoothness; even after the recommended minutes of frantic spinning, the bearings felt slightly crunchy. I wanted to pack them with grease, but worried it would become sluggish. However, over the period of a week or two it smoothed out very nicely, and has only improved since.

I think roller bearings are a great idea compared to static bearings, although some angles do seem to have quirks. An extreme example is found by attempting to twist the ball, but certain movements are, in my experience, affected to a lesser degree. This wasn't difficult to get used to, and was probably more attributable to less prior trackball experience.

My main criticism is the scroll wheel: it feels too far backwards; I can press it, but can't move it with a comfortable hand-position. The 'thumb-crunches' action also feels unnatural. I think both problems might be solved by rotating the wheel 90° as this means that the thumb can scroll without bending, in a similar manner to hitting a space-bar.

Giving the pinky-side a flat section would allow easy tenting, though it would break the clean shell lines. I've been considering some long screws to use for crkbd-style tenting, but a flat would allow it to just be propped against, say, the edge of a laptop.

My other criticisms were about button placement and remapping, such as the desire for dedicated middle-click and high-accuracy buttons, but these have, I believe, been solved with the addition of QMK.

Overall I'm incredibly impressed by the quality and comfort of this product:

  • The 3D printing has a nice grippy texture, but doesn't seem to reduce the rigidity or durability over months of heavy use.

  • The buttons are lovely and light, clicky but not annoying, and well-placed relative to my fingers.

  • The ball action (after fully breaking-in) is smooth and accurate.

  • The shape feels great against my palm, and complements the static placement; I never have to look down at my desk to find my mouse, and my hand seats comfortably.

  • The USB type-B port is ideal for always-on-the-desk use imo, with low risk of accidental disconnection if knocked.

If you're on the fence, I think it's well-worth the price, even for a uni student as myself, and especially now with QMK under the hood. I'm excited to see the progress on the new smaller version, which I hope will also run QMK/VIA, and who knows, maybe even BTU bearings. I'm hooked!

Posted Dec 19, 2020, 7:49 PM UTC

2212
Loading comments…