UnfortunateFishOP•

4x8 dual door, window on the other side with a fantastic fan vent up top. Once I get the rest of the major exterior parts done, its smooth sailing from there.

5
RockysHotChicken•

How did you go about making your own door?

2
UnfortunateFishOP•

Framed and finished just like the walls of the trailer, for the seals, I'm going to make about a 2 inch trim piece that goes around the outside edge that will have a D shaped rubber seal. When closed it will squish the seal against the wall of the camper. For the hinge side I'm going to cut up a bicycle tire tube and lay that under both sides of the hinge and I'm hoping that will prevent water from making its way in there.

I'll post more pictures once I get to it. If all goes planned I'll have those done next week!

3
RockysHotChicken•

Awesome thanks! I’m hoping to build an inexpensive teardrop one day!

2
UnfortunateFishOP•

Yeah, pre-made doors are way too expensive in my opinion. Would have spent more on just one door than the trailer itself if I went with pre-fabricated doors.

2
FatchRacall•

build an inexpensive teardrop

Oh sweet summer child. Buy used and refurb if you must. Building will 100% come with hidden unexpected costs. I'm well over $3k into mine and I haven't got the walls up or the materials for the outer skin, insulation, galley, electrical...

-1
Pbacker•

Poorman’s fiberglass or actual?

3
UnfortunateFishOP•

I'm going with actual fiberglass. 6oz plain weave and RAKA Inc. 127 epoxy with 350 hardener. I want it to last a long time so I just bit the bullet and went with the real deal.

3
michellealyssa•

What is poor man's fiberglass?

3
Pbacker•

Basically it’s canvas stretched and glued with Titebond II glue and then layered with more glue and/or paint. Usually used a lot on foamies, but has been used on other teardrop builds as well. Basically a cheaper alternative than using actual fiberglass

4
michellealyssa•

Thanks for the explanation. I learned about something new!

4
Anabeer•

You don't even have to buy canvas...cheap painter's drop cloths work real good.

2
FOXDuneRider•

Have you had to do any welding?

1
UnfortunateFishOP•

I welded on the tongue jack and a few spots on the frame but you can 100% get away with no welding.

1
FOXDuneRider•

That’s what I am aiming for, I have a metal frame trailer with 2 ft “sides” that go all the way around. I was hoping that I could build on top of that.

1
Mysterious_Ad_3123•

Looks Great!. Is that a Harbor Freight Trailer? do you have pics of your inside framing? This is exactly what I want to do.. Thanks

1
UnfortunateFishOP•

Thanks! It is a harbofreight trailer, I have pics of the build throughout on my other phone that I've been meaning to pull off, ill have them soon.

1