r/buildapc•
Fallinnn

First time build, no display or usb power

Hi, I recently built a PC for the first time. However, Im havent managed to get any image display or get the usbs to work on it. When I power it on my motherboard lights up the RGB, AIO fans starts and so goes the GPU fans. I have tried to reseat all the cables and still nothing.

​

My specs are:

Ryzen 7 3700x

Aorus Pro B550-I

Corsair Vengeance DDR4 2666Mhz 16gb

NZXT H1 case with the included pcie bracket, psu and aio.

Samsung 970 Evo Plus 1tb SSD

Gigabyte RTX 3060 TI Gaming OC

Edit: Tried to update bios and both bios usb and memory stick started to light up and blink so seems like its not the motherboard.

Edit 2: FIXED. The issue was the PCIE Riser which is PCIE 3 inbetween a motherboard that uses PCIE 4 and GPU that uses PCIE 4. Motherboard thinks you have PCIE 4 as its set to Auto in Bios, but wont recognize anything as it is just PCIE 3. Try with another GPU if you have the same issue and youre struggling.

Posted Jan 2, 2021, 10:21 AM UTC · edited

1924
DanVA0307•

Same thing happened to me, could either be a dead graphic card or the cables going into your graphics card. I’d test the monitor with another system first, then I would test the cables (if you have extensions remove them and use the stock psu cables) and if you can’t I’d say take it to a tech shop like Microcenter to and ask them for help

4
FallinnnOP•

I tried with two different PCIE Power cables, that didnt help. Dont have a microsenter in my country so might be difficult. The monitor also works on my current/old pc so it shouldnt be an issue. Thanks for the help, might try and test another graphics card if I get the chance

1
jizzelmeister•

Try put in the ram again,my first time was like this and i had to push, i mean push hard, the ram in. If that doesnt work the other slots for your ram.

2
FallinnnOP•

I can try to just use one stick too. Also heard that the Corsair Vengeance LPX have had some compatibility issues with AMD processors earlier. Maybe thats something that may be the issue?

1
jizzelmeister•

I built like 3pcs and twice they didnt booth cuz of the corsair rgb vengence ram wasnt in right, for both of them i had to switch each stick with the opposite 2 slots for the first bootup. So it was in slot 1 and 3, instead of 2 and 4. Try it, tell uz if it works. Goodluck

1
FallinnnOP•

Thanks. Since my pc is an ITX formfactor its only 2 slots, but I will try to flip the ram sticks and then just try one

1
jizzelmeister•

Ah shit ok mate, only other thing icould think of would be the graphics card isnt in right ,or something. I mess with my pc changing things alot and usually if it doesnt shpw a picture on the screen is because the gpu isnt connected right or even the cable from the gpu to the monitor. Hops any of this helps

1
BeardedTerminator•

So, Ryzen doesnt support/have on board graphics so you wont be able to change the settings needed to get your PCI-e changed from Auto to 3 - I had this same problem.

The only solution I had was to put my old graphics card into the system with my PCI-e riser.

So, get your old graphics card, place that into your new build boot into bios and change PCI-e from auto to 3 - once down power down put your 3060 in and that should solve it

2
FallinnnOP•

But does that explain why my usbs dont work?

1
BeardedTerminator•

I mean, priorities my friend.. first fix the reason why you have no image output then look at the second less concerning issue. According to your edit the USB light powers on when plugged in.. so safe to say theres no issue with ports or motherboard.. Please attempt the fix I have suggested as thats really what it is sounding like.

2
FallinnnOP•

True. I will try to use another GPU and if thats not working then its probably either CPU or RAM since I can use the Q flash bios that doesnt need CPU or RAM to work, but it doesnt work otherwise

1
FallinnnOP•

Update on this: This worked. So thank you!

I tried my friends GPU and I got to post. Im really happy that no parts were actually damaged.

1
BeardedTerminator•

Thats great. Thought that would be the case. I literally have the same set up but in a Jonsbo A4 and had the problem when building also. Would be nice if people made new comers to Ryzen more aware of the fact theres no onboard graphics!

2
[deleted]•

[deleted]

1
Kmiller6637•

Is there any chance your bios is incompatible with your cpu?

1
FallinnnOP•

It should be fine. B550 should support 3000 series AMD GPU out of the box, maybe have to try update to the newest anyways?

1
Kmiller6637•

I would be surprised if that’s it but it might not hurt. I just rebuilt my pc with a new to me motherboard and graphics card. Had all led’s and fans on but no display. Only after updating the bios did I finally get any sort of output.

1
FallinnnOP•

What processor did you have?

1
Kmiller6637•
  1. Bought a used B450 board and the bios was never updated.
1
M4nDrid•

After reading the rest of comments the only thing that I can possibly think of is a bad port. Try plugging it into the other, as that gpu has 2 hdmi and 2 DP ports. Also try dp is hdmi is not working and vice versa.

1
FallinnnOP•

None of the ports are working, unfortunately.

1
Daeidon•

Remove the GPU and try using the onboard. If that boots up run some tests and see if there are any problems with your components, RAM, SSD, etc.

My long shot is that your GPU is not seated correctly. If you get to the point where your GPU can be put back in make sure you press down firmly and evenly across that card. Those suckers are stiff on a new build and sometimes the locking mechanism doesn't work the way you think it does.

1
FallinnnOP•

I can try to reseat my GPU, thank you!

1
Inside_Lawyer•

Does your motherboard have a built-in dvi-d/hdmi port? Are you using it? If yes then use the ports on your graphics card, if not then test the ports and monitor with other systems?

1