Hikari Ipoe VNE Service Quality Question
Hi Everyone,
I'm trying to wrap my head around switching form Fleets Hikari and Gaming Plus, to Docomo hikari in order to save money by bundling my phone with my home internet.
I'm really happy with the ipv4 speeds from Gaming Plus, but I understand they are just reselling an IPv6 VNE's internet service? In this case it seems like JNE since their IPv4 over IPv6 technology is v6 plus, and they link to JNE's website for compatible routers.
So for my move from Fleets to Docomo Hikari, I want to stay with JNE I think, but I can't seem to find which VNE the Docomo Hikari providers use.
"Docomo Net" says it uses a combination of OCN Virtual Connect and Transix for their ipv4 over ipv6 solution. Does this mean its possible to have multiple VNEs and Docomo net uses both OCN and Transix, or do VNEs also sell their ipv4 over ipv6 solutions to customers using a different VNE for ipv6 internet connectivity. If so, can I check my current VNE in case Gaming Plus does not use JNE, since my youtube speeds are good, and I want to stay with the same IPv6 VNE, as well as IPv4 over IPv6 provider.
And finally, is my ISP at all involved in either IPv6 IPoE, or IPv4 Over IPv6. Like, does JNE give my ipv4 packets to Gaming Plus after it gets to their AFTR(or Map-E equivalent) or is it just handled by JNE? I'm only interested in switching if I can get the same service I do with gaming plus, because I have had slow internet with OCN before and it was really frustrating, and not worth what I would save by moving off of fleets.
So if they are just reselling JNE I think @ -nifty also mentions it uses v6 plus for IPv6 over Ipv4, and seems like they would be using JNE as a VNE(?) meaning I would be getting exactly the same service as I do on gaming plus? Maybe +or- DNS server speed, email account, customer service?
Thanks so much for any help and apologies if I'm misunderstanding anything. I attempted to do a lot of research but eventually got stuck, possibly due to my poor Japanese to google for the right answer.
Posted Jan 2, 2021, 7:03 PM UTC · edited
Gaming Plus is reselling JPNE's VNE service, but you should check the IPv4 address at the end of the tunnel (ie: that shown by 'what is my IP address?' sites) to see whose netblock it belongs to, as it may be that there is a dedicated BR for the Gaming Plus services, so that the IPv4 addresses you can make use of are located closer to popular gaming servers. If the addresses are simply in JPNE's IPv4 allocation, then there is nothing special about them. Generally, ISPs will offload IPv6 to IPv4 translation service to the VNE and will have nothing to do with your connectivity unless you use PPPoE, and this is of particular advantage when using junk-grade ISPs such as the 'FreeBit' brands.
To verify your VNE, find your global IPv6 address and look it up using WHOIS (https://www.nic.ad.jp/).
If you want to continue to use JPNE as your VNE, then you need an ISP on the DoCoMo Hikari menu that provides 'v6 Plus' service (https://www.jpne.co.jp/service/v6plus/). You can find a list here: https://www.nttdocomo.co.jp/binary/pdf/hikari/provider_list/ipv6/IPv6_compatibility.pdf
Note that BIGLOBE is also using MAP-E, but they are their own VNE: https://ja.wikipedia.org/wiki/%E4%BB%AE%E6%83%B3%E5%9B%BA%E5%AE%9A%E9%80%9A%E4%BF%A1%E6%8F%90%E4%BE%9B%E8%80%85#%E3%83%95%E3%83%AC%E3%83%83%E3%83%84%E7%B6%B2%E3%81%AB%E3%81%8A%E3%81%91%E3%82%8BVNE has a list of VNEs.
If you are particularly set on JPNE, then @Nifty and GMO will allow you to continue using that service if you switch your billing relationship from NTT West/East to NTT DoCoMo.
When you cease to be an NTT West/East retail customer and choose either the collaboration or the NTT DoCoMo billing model, your choice of VNE is limited to that which your PPPoE ISP allows you to select, and you may only select one VNE per FLETS circuit.
OCN Virtual Connect is MAP-E, and it appears that they also have a contract with Transix (operated by Internet Multifeed: IMF - themselves a VNE) for those whose CPE is not MAP-E compliant: Transix will only perform the AFTR role for those B4 devices whose IPv6 address lies within a prefix allocated by one of their customers: most Transix users are users of the IMF VNE, but the OCN setup has NTT Communications (their own VNE) allocating your IPv6 address, which will then be accepted by Transix for use with their DS-Lite AFTR.
Presumably NTT Communications does not wish to implement DS-Lite on their own network and has outsourced it to IMF - depending on where the OCN Virtual Connect BR nodes are located, they may be closer to you. Because your own equipment supports MAP-E it should probably work with OCN Virtual Connect without issue, but you won't be using JPNE's network.
Thank you for the very detailed reply! It looks like I am indeed using JPNE ipv4 and ipv6 addresses!
It sounds like, based on your explanation, the double circles in the PDF that do both "OCN virtual connect, and Transix" are just using OCN as the VNE, and if your device supports MAP-E using OCN virtual connect, and if only DS-Lite using Transix. So I could attempt to use Docomo Net as my ISP and try OCN as a VNE. I had them as a PPPOE isp before and was unhappy with the speed, but that might just have been general PPPOE infrastructure issues.
I do wonder if OCN's MAP-E different from JPNE's. My router claims it will do "v6 Plus" MAP-E, which BIGGLOBE and JPNE use, but I wonder if OCN's is just different enough to be incompatible, since they only List NTT HGWs and the Docomo Router as supporting OCN virtual connect, rather than having a list as big as JPNE's.
I would encourage you to try 'DoCoMo Net'. If you want to change the ISP later, that is possible without a cease and reprovide, although there are some fees applicable.
PPPoE issues are due to NTT West/East network planning limitations: I and others have discussed this in detail before (search for 網終端装置服装).
My personal belief is that telcos should not involve themselves in IP routing, and that they should focus on layer 2 transport: 'IPoE' involves the telco in routing, and results in the trap that is it necessary to take out a 'Hikari Denwa' service to obtain anything larger than a /64 - the access network operated by the telco should always be a 'dumb pipe' (土管屋), and the addressing specifics should be between the client and the ISP.
BIGLOBE is no longer providing JPNE service to new customers: the 'v6 Plus' option is now closed to new subscriptions, because BIGLOBE is now a VNE in its own right. The 'v6 option' is what they provide now.
For actual compatibility you will need to ask the device vendor or run the risk: at least with both MAP-E and DS-Lite, you have more options. As 'v6 Plus' is a trademark rather than a specification, NTT Communications (OCN) cannot refer to their MAP-E implementation as such.
Incidentally, if you subscribe to the 10 Gbps service, PPPoE is not available (because PPPoE interconnections with NTT West/East are not capable of anything close to that speed), and thus the ISP branding is completely irrelevant for the purposes of choosing the quality of the connection - everything comes down to the VNE, and the 'ISP' is reduced to a reseller.
Thank you for the reply!
It seems like BIGLOBE's v6 option uses the exact same MAP-E as JPNE does though, since their website mentions v6 plus compatible routers will work with their service. Or is this incorrect, and its only for when they used to use JPNE?
https://support.biglobe.ne.jp/ipv6/option.html
"MAP-E機能を搭載している市販の機器においてもIPv6オプションをご利用いただけますが、すべての機種でIPv6オプションを使えることを保証するものではありません。また、当社では当該機器の動作をサポートしておりません"
Basic MAP-E support should be sufficient, but there is no guarantee, especially for inbound port fowarding. BIGLOBE should not be referring to 'v6 Plus' compatibility with their own VNE's MAP-E implementation, as 'v6 Plus' is JPNE's trademark.