Source
r/ASUS•
CowFisho

Wont Boot/No Q-Code after applying D.O.C.P X570-E

Support

I built my new gaming rig this weekend and ran some benchmarks. After enabling D.O.C.P it gave the Q-code d1 I rebooted the system and the Q-code stays black I suspect the MB is bricked. The ROG lights on the MB lights up but shuts down briefly when I press the power button. I've tried updating bios using flashback, this is only possible if I remove the RAM (no light otherwise)

Specs are X570-E 5900X 6800 2tb nvme ssd 4x 8gb sticks (F4-3600C16D-16GTZR)

I'm new to AMD chipsets and haven't encountered this before, thanks for any advice

Posted Jan 9, 2021, 7:12 PM UTC

14
PM_ME_UURR_ANUS•

Have you reset the cmos?

1
CowFishoOP•

Yes, tried both shorting the pins, and removing the battery

1
soupychan•

Have you tried running on individual RAM sticks and trying different DIMM slots after you cleared CMOS to see if it can post? If you have a spare Ryzen CPU to test with that'd help eliminate possibilities too. I had a 5950X turn up dead when I had thought it was my X570E at first. Same mobo is running a 5900X now perfectly fine.

1
CowFishoOP•

I've tried individual sticks in different slots. I've tried both ram and psu in other system with success. I've also tried known working ram without it booting. I don't have a spare ryzen unfortunately, but the behavior of the board, and the fact that the q-code stays black (worked before) even after multiple bios flashes is a good sign of mb failure The system even worked before I enabled D.O.C.P and I ran benchmarks

(Yes I've cleared the cmos)

1