Epomaker GK96(L)S Review-ish

Got mine in about two days ago (I specifically ordered the LS in ABS) done nothing to it but change the caps out and add silencers, and all I can say is that this is one tragic keyboard. Not even close to what I was expecting of it.

Pros:

  • Hot-swappable.
  • Left-handed numpad option.
  • The case is actually pretty sleek.
  • Massive battery that adds some decent weight as a bonus.
  • Support for multiple Bluetooth devices if that's your thing.

Cons:

  • For some reason you cannot edit the default layer at all, nor the FN layer. These are hard coded, so if you don't like how Epomaker assigned them, tough.
  • Can change the assignment of the FN key, but cannot reassign the FN command to another key.
  • Can reassign caps lock, scroll lock, etc. but for some reason cannot (re)assign what keys illuminate to indicate their status.
  • Can't assign unique lighting to different layers, all layers display the same preset.
  • Dimmest backlighting LEDs of any keyboard I own at full intensity, even plugged in. This thing gets smoked by a few bottom dollar eBay keyboards I own; pictures are super deceptive about this.
  • #FFFFFF as a backlighting color comes out as UV purple. At first I thought this might be my caps tinting the light (Taihao Sakura Michi) but the white ABS caps included with the board produce this color as well.
  • Switches don't actually fit into the plate correctly, the bottom retention clip just sort of gets smashed into the switch body. I was originally thinking this was maybe a Gateron specific issue, but several varieties of Kailh switches I have lying around also do this.
  • The keyboard crashed while typing this? I've been using what they call the "Driver" layer, which is only accessible when connected to a PC running their software as it's as close to a programmable default layer as you'll get. Keyboard just inexplicably went haywire on me and disconnected from software.

All in all this wound up being an expensive letdown because things like the backlighting and customizable layouts were big ticket items for me, and instead I wound up with a pile of "well technically" features. For what I've received I feel like I might as well have just stuck with my 88-key and bought a separate numpad instead. I definitely don't understand why this keyboard couldn't have just been made to support QMK.

Bottom line: If the advanced features are the thing drawing you to this board, hard pass, sincerely wish I would have backed out. If you want it for some other reason that has nothing to do with customization then it'll probably treat you right. It's not bad overall, but definitely falls short on delivery.

Posted Jan 13, 2021, 10:54 PM UTC

78
Amaakaams•

Hmm. Just built one for my GF. She didn't need any reprogramming done and honestly as close as it is to full size I can understand the decreased need to reprogram it. As for RGB set per layer I guess I haven't used enough boards but I didn't know that was a thing.

I'll have to borrow it from her and see if I can play with it in software. I get that there is a lot of functionality that can get lost easily if you change the layer. But what you are describing is a lot different then my GK61X and GK68XS experience. I had three layers that you could edit, the downside is Functions had to be pulled from another layer meaning I Only had 2 typing layers and one function/macro layer. But still editible. So like I said I'll grab her board tonight and see if I can get some profile editing in.

2
Amaakaams•

Okay went back through your cons.

  1. You have 3.5 editable layers. This is the same as most customs using VIA. Having a "defualt" layer that isn't editable isn't abnormal. Heck my Ducky keyboards have 6 layers but still keep Layer 1 as fall back. Think this might be a support issue. Someone screws up their board, telling them to switch to an untouchable layer will make it easier to work on their other issues. It's just also a good thing for a normal user. When all fails, go the fallback.
  2. This is disappointing. I was kind of annoyed of this on the GK61 as the far right (typically ctrl) is annoying. There is a bit of a con like solution using a temp layer switch, then assigning the FN commands to another layer. For me I am fine with 2 layers a typing layer and gaming layer. But if you need 3 active editable layers this is disappointing.
  3. Pretty sure this is just a lighting layer configuration since it just switches the switch SMD to white rather than a secondary light for the funciton. The Con here is that this process is to complicated to create your own light scheme.
  4. You can't have independent settings you get the ones that you can assign. My tests did have the board remembering which lighting affect was last used and changed as I changed layers.
  5. Correct. I think this might be because they might be using the same controller and therefore lighting power or they have just capped off the max lighting, to increase the battery time with lighting. Either way its brightness is very lackluster.
  6. This one I didn't try. Honestly I am not going to hold specific color hues against a $110, near full size, hotswappable, programmable, RGB, BT keyboard (with switches and PBT keycaps). But if the color is off its off and that matters if that is the color you want.
  7. I should have spoke on this yesterday. But I don't know if you had a bent plate or something. But this was a dream to work with for me and saw the exact opposite. It fit, fit well, with pretty much no play on switches, and proper snapped into play. Maybe they have tolerance issues. My GF's Plate was great (if there is a complaint here its the white plate. It was almost impossible to pull out a switch without rubbing/scratching the paint off the plate). The defualt Gateron Browns were in fine and the Kaihl coppers were what I installed.
  8. You have 3 programmable layers that are permanent. The driver one is a weird one. I wouldn't use it and yeah is probably why they keyboard crashed. I could see the software randomly crashing. It's not the greatest software and won't be defending that.
2
angethedude•

I just got this board and I'm super disappointed as well. I hate the software and didn't expect it to be so needlessly obscure. The whole board just feels so cheap. I might try adding some foam and changing the switches out so it's not so hollow-sounding.

1
slimeyx•

Mine's finicky too. I'm going to spend more time working out the kinks. Their driver software was just recently updated.

1
Shurley-not•

Just got mine yesterday.

Looks and feels great etc.

I'm having trouble with the temporary layering switching:

I have media keys mapped to arrow keys etc. in one of the extra layers. If I am still pressing any of the custom media keys as release the layer switch key the command continues despite no keys being pressed - i.e. the volume will drop all the way to zero or the media player will skip to the next song endlessly. It also sometimes pauses/plays instead of doing volume changes (but I haven't tested this in another PC)

Also, I could have sworn I had ordered the southpaw variant, but this was not reflected in any of the invoices - so most likely my fault.

Will see how I go in the next could of days but I am very tempted to return it despite waiting more than month for the pre-order.

1
kittysneeze88•

That’s funny you say that, since I had the same issue.

After reviewing the steps I took to purchase it, I think I found the mistake. The Kickstarter page for the southpaw links you to the page of the standard version, which I guess I never noticed until it was delivered today.

I would consider returning it, but they have a 35% restocking fee, which offsets the benefit enough for me to just keep it.

1
Shurley-not•

I did my order all via the epomaker website instead of the Kickstarter. Kind of glad I have dedicated arrow keys in hindsight.

1
kittysneeze88•

Agreed. It makes up for my error, as I use the arrow keys frequently.

1