Need Help Bringing a PowerBook 2400c Back From The Grave

So recently I decided to start downsizing my Mac collection - I could use both the money and the space - so I'm finishing up some of my long-standing projects. One of which, was a literal box full of loose parts that was given to me many years ago. All it said on the side was 'some kind of old apple laptop'. So I started digging through it and found that it was a PowerBook 2400c. Luckily it appeared that all of the parts were there, and I was able to get it put back together after a few hours of trial and error.

Powering it on found that there were a few issues. 1) the internal HD was junk, and 2) the LCD screen was broken. However, it would boot and work from an external SCSI HD and a VGA monitor. I was able to put an extra 16MB of EDO RAM into it as well, to make it a bit more tolerable to use, and have a $7 64MB module coming in from eBay. It's a really nice little machine, I love the keyboard and would like to just use it, but it seems that the LCD panels are unobtainium, so it may be broken forever, or until a suitable donor system can be found.

So the thing that I need help with is this. I can't seem to get an internal HD to be detected. I've tried all sorts of different drives, CF cards, etc. and nothing appears to work. The drives spin up, so clearly have power, but are never detected by the OS. In fact, when I run System Profiler, it doesn't even show an ATA or IDE bus, it only shows the SCSI bus, which I find kind of odd. If it was just a bad drive, I would expect to see two buses, SCSI and ATA, with just no drives on the ATA bus.

So my question - what can I do? Is there a known issue with the IDE controller on these things? Any fix? Is there some kind of driver or software needed and I'm just not figuring it out correctly? I've tried 7.6.1 and 8.0 and neither could see the bus or the drive.

If push comes to shove, I can simply put it all back together without an internal drive and sell it 'as is' or as a donor system, but it'd be nice to at least get this figured out.

Posted Feb 12, 2021, 11:48 PM UTC

75
[deleted]•

Try formatting the CF card from OS X as Mac OS extended (journaled is fine). Choose the Apple Partition Map option (not GUID) so you can boot the 2300 from it later. Partition the drive so there is a 2 GB partition at the “front” of the drive. The 2300 won’t find a system folder beyond this. This will also help you figure out if it’s a partition size issue (like if it sees the 2 GB drive, but not any larger partition).

Hopefully preformatting the drive this way will help it work.

2
leadacid44OP•

Hey, thanks for the suggestion. I tried that and it ultimately didn't work. I ultimately think the ATA controller on the system is dead.

1
patb-macdoc•

Put the cf card in the pcmcia slot (its in the back- actually two slots on top of each other). It will boot happily from there if the card is properly formatted and has a valid system folder.

2

I second this idea - sounds like the main logic board drive connector or controller may have issues.

Any generic cheap PCMCIA to CF adapter should work. No need for anything special.

2
leadacid44OP•

Hey, thanks for the suggestion, that worked perfectly! I'm not sure why I didn't think of that before, since macs will boot off of just about anything. I've got OS9 running on a 4GB CF card now without issue. I do think that the ATA controller is dead though. Too bad, but not the end of the world.

2
therocketsalad•

To this day the image haunts me, burnt in my retinas and scorched into my neurons: the year, 2005 - Ithaca, NY Recycling Center - me, tossing two nearly complete 2400s with the Green Light of Death as well as a box of parts including two perfect screen assemblies. Just right in the dumpster. Life turned upside down and not thinking straight, just needed to lose dead weight as fast as possible. This was one of many wrong choices that week. Gear I would realize years later was irreplaceable. Period.

It felt wrong then, and fifteen years later it feels worse every day 😓

1