Help with older Schacht Rigid-Heddle loom

I was gifted this lovely old Schact loom recently. As a wannabe-weaver without the funds to buy a new loom, I am thrilled! I have cleaned it up and made a new stand for it and I’m ready to try it out but I am confused by one thing. On all the similar looms I can find videos and images of, there are two (or more) places for the heddle to rest, one for the “up” position and one for “down” or neutral. This only has one spot and because the frame around the heddles are wider on the bottom than the top, it looks like they can only rest in one position once threaded. What am I missing or misunderstanding? Photos below. Thanks in advance for any help!

https://ibb.co/Wp5j1kW https://ibb.co/mBkw3V8 https://ibb.co/bLdWgFD https://ibb.co/mDyX3zw

Posted Feb 15, 2021, 8:58 PM UTC

310
weaverlorelei•

Up is the bottom of the heddle resting on top of those blocks, resting/neutral is bottom of heddle resting in the groove, and down is the bottom bar of the heddle slid below the bottom of that block

5
phoebezillaOP•

So when it is down, does it just “hang” on the warp? Since the top of the heddle is narrower it fits between the blocks.

1
weaverlorelei•

The bottom bar of the heddle goes below the block, holding the warps in the holes in the down position. Tension hold it in place

3
weaverlorelei•
3
phoebezillaOP•

Thanks for this, super helpful! I didn’t even think to look for a manual since it is an older model. You’re a gem!

1
weaverlorelei•

No problem. I sold Schacht products for 20 yrs, a few years back

2
dawntodusk27•

These little looms are gems. I have two 8 shaft floor looms, but I love my little rigid heddle. Pure weaving fun!

2
phoebezillaOP•

Someday I’ll have space for floor looms! Excited to see what I can create on this little guy in the meantime.

2