Alienware 15 R3 keeps getting blue screen after C drive upgrade
Problem with laptop. I get frequent bluescreens now. I can't figure out why. Its kinda making me nuts.
The laptop is an Alienware 15 R3. I have a Dell Service Tag and Serial Number. I purchased the laptop new in late 2018. It is out of warranty.
It came with two drives:
Toshiba NVMe 256gb which served as the C drive. Model: THNSN5256GPUK
And a regular old, 1 TB 2.5" SATA laptop drive, I use as the D drive.
I kept the OS on C, and personal data on D. Everything that is important on the D drive, is routinely backed up to a removable E drive.
A few months after buying it, I began to get S.M.A.R.T. messages saying that there was some kind of problem with the C drive. I researched it, best info I found was that "the drive could fail in 10 minutes or in 10 years. No way to know." So I purchased a replacement M.2 drive to keep ready until C failed.
The new C drive is a 1TB Samsung 970 EVO NVMe M.2. Basically, I bought it, it sat on a shelf until the original C failed, which was a couple days ago.
With the original drive in place, I was installing 3ds Max, and the damn thing blue screened.
Tried to reboot - the laptop wouldn't even get to the Alienware logo. Apparently there was a problem with Power-On-Self-Test. The computer turned on. Lights on the sides lit up, little alien head power button went on (sometimes blue, sometimes amber) but was unable to complete the Power-On-Self-Test, and wouldn't go further. I couldn't get to the bios.
I assumed the original C drive just died. Time to put in the 970 EVO!
On a working computer, I download the Dell OS Recovery Tool, and created a bootable USB drive.
I open the laptop (carefully. I'm a programmer, not a repair expert, but this isn't my first day at the rodeo with this kind of crap), remove the busted stick of gum sized NVMe C drive, and with only the D drive, I try to boot up using the USB drive.
It booted fine. I assume therefore the POST problem was the C drive had finally "gone bad" and was blocking getting to the bios.
I power down, add the 970 EVO drive in the same M.2 slot as the old drive, boot up, and use the OS Recovery Tool to install a fresh Win10 OS on the 970 EVO drive.
I then begin the process of applying all Windows Updates. Once that's done, I start reinstalling all the apps I commonly use - Visual Studio, MS SQL Server management studio, all the browsers (Chrome, Firefox, etc.), and all the other crap, including 3ds Max (which I don't normally use but I had to convert some MAX files.).
Everything seems to be wonderful, until I get a bluescreen.
WHEA_UNCORRECTABLE_ERROR Research shows this is a hardware failure or a driver problem.
So I go to the Alienware website and update server and download many popular updates to drivers.
Installed
Dell-Security-Advisory-Update-DSA-2020-059_VMKTD_WIN64_1.0.0.0_A00.EXE Dell-Update-Alienware-Update-Application_92HRG_WIN_4.1.0_A00.EXE Intel-Management-Engine-Interface-Driver_5RMDW_WIN_2014.14.0.1540_A04.EXE Intel-Thunderbolt-Controller-Driver_TBT79_WIN_17.4.79.510_A12.EXE NVIDIA-Graphics-Driver_CP1WM_WIN_27.21.14.5687_A07.EXE Qualcomm-QCA61x4A-QCA9377-WiFi-and-Bluetooth-Driver_4747J_WIN_12.0.0.916_A33.EXE
Blue screens continue. Either WHEA_UNCORRECTABLE_ERROR or CLOCK WATCHDOG TIMEOUT
I thought an old driver for the 970 EVO might be to blame. I switched the BIOS from Raid to AHCI, and updated the 970 driver. No change in bluescreens.
I'm kind of at my wits end.
I've check the hardware with the 4.5 hour long diagnostic built into the Alienware. It says everything is normal.
I've checked all disks with Crystal Disk Info. Everything is cool.
I've run both OpenHardwareMonitor and HWMonitor. Nothing out of the ordinary jumps out at me with either (but I'm not an expert here).
One thing I did notice - bluescreens seem to happen more often when I am watching Netflix or YouTube. Could it be graphics related?? Or this might be my imagination.
I did notice under Device Manager two display adapters:
Intel(R) HD Graphics 630
NVIDIA GeForce GTX 1070
Is it a good idea to have two? Maybe they are competing somehow??
For the record, I have a Dell Docking station hooked to the laptop via LightningBolt USB-C. The docking station has 3, 27" monitors connected to it, giving me lots of desktop space.
But this is nothing new. I've been using this setup since Apr 2020, long before the C drive crash that started all this. I've never really had blue screen until
Could it be 3ds Max?? I've never really used that software before. Looking at Process Explorer, there is some process that is running, but it takes almost no resources.
Someone suggested a "bad install" of the OS. Whatever the hell that is supposed to mean. He suggested wiping the C drive and doing it all again, slower this time to see an issue can be determined.
Any thoughts?
(Oh and I was doing some proofreading and JUST AS I WAS ABOUT TO SUBMIT THIS POST... Bluescreen. Grrr...)
Posted Feb 17, 2021, 10:25 AM UTC · edited