I want to capture data sent between an rc522 chip and an Arduino by capturing electric signals over the wires connecting them.

T

I am making a tech project for school and while my initial proposal was just to make an RFID door that uses network authentication. Basically this but checking with a database for authentication. I remembered a tool today that was from a pen test group that captured and stored credentials. I basically want to make my own version of this tool and program it for the simpler mifare protocol.

My question is what are my options for capturing the data? once I have a way of capturing data I think I need to find a way of converting that into useful credentials but I think that will be easier for me to search and figure out. I have little electrical engineering knowledge, mostly programming and computer networking. I am doing research into if I think I can make this in time and if I can make it at all right now.

​

Thanks for any help in advance

Posted Feb 18, 2021, 4:58 PM UTC

25
Turtle_The_Cat•

You want a logic analyzer. This one is super cheap and easy to use with Salae's Logic software.

2
pei_cubeOP•

That looks like what I want yeah. I will have to do some reading on how logic analyzers work and watch a few tutorials but I think this should be a good starting point.

​

If I want the logic analyzer to be totally separate from the RFID Arduino door I will need a second Arduino or pi to run the Logic software is that correct?

1
Turtle_The_Cat•

Unsure if logic will run on an embedded device. What I would do is use the logic analyzer with a computer to get an idea for the speed and form of the signals you're trying to capture. If they're slow enough, you may even be able to use the digital inputs of a microcontroller to interpret them directly, much like the product you linked. What you'd be doing is effectively writing an arduino "driver" for this interface, much like I2C or SPI. Looking at libraries that do software serial will give you an idea of how to program something to interpret fast signals.

1
pei_cubeOP•

Thanks for the help, I think I might be able to put this together in a month.

1
AutoModeratorMOD•

This submission falls under the newly expanded focus of this sub (see column "G" in this table). OP, also check if one of these other subs is more appropriate for your question. Downvote this comment to remove this entire submission.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

1