Windows won't detect one monitor over DisplayPort
I'm having the weirdest issue that has occurred across four different graphics cards and two different monitors and the only part that stayed constant was Windows. Sometimes when I boot into Windows (whether from hibernation or shutdown) it fails to detect one of my DisplayPort monitors. Restarting doesn't fix the issue. The only way to fix it is to connect the monitor via HDMI in addition to DP, wait a second for it to show up, then unplug the HDMI cable and it continues to work via the DP connection.
This has happened with a GTX 980, a GTX 1080 Ti from Zotac, a different 1080 Ti from Gigabyte and a brand new RTX 3080. It's always the same monitor that's having the issue, but swapping it with a brand new one simply moved the issue to the second monitor (which was always working until that point). I've swapped DP ports on the cards to every possible configuration and the monitor affected stayed the same.
Like mentioned above, it seems the only thing affected is the initial detection of the monitor, since once the connection is established everything works fine. The issue doesn't happen very frequently, about once every 60 or so restarts, but it's very annoying having to crawl behind the PC to swap out cables. I can't find anything similar online and my only option is to hope I can get help here.
Posted Feb 27, 2021, 11:27 AM UTC
[deleted]
I've done that. The monitor isn't getting any signal and it's not showing up on Windows until I also plug it in with HDMI and then it works fine over DP.
[deleted]
It happened with two motherboards and 3 different cables so I guess if it happens outside of Windows it must be a firmware issue. Both monitors that had this specific issue were AOC 2868PQU monitors (a discontinued model). There was another issue that presents the same way, but that was resolved by rebooting the monitor with an LG 27UL650-W as well as the AOC ones. That one is a lot more common but easy to fix so not as annoying.