Nyan Cat costume

My coworkers suggested that I be Nyan Cat for Halloween. For reference: http://en.wikipedia.org/wiki/Nyan_Cat

I googled "nyan cat costume" and found this http://www.craftster.org/forum/index.php?topic=388828.0 which I used for inspiration, but I felt like the side-view nyan cat would be hard to walk around in, so I decided to make a front-view costume.

I haven't done many big sewing projects (since making pajamas in middle school) so I felt like a noob while making this but I learned a lot. I thought I would share my process:

Got six 6-inch strips of red, orange, yellow, green, blue, purple. I got satin because it was light-weight and on sale. I found out later that satin frays a lot and I learned what pinking shears were. I folded over 1 cm edges lengthwise then sewed the color strips together. About half-way as I realized that the fraying was getting worse, I tried folding over the edge twice which helped a little.

I took some beige fleece cloth (which I got because it was on sale) and measured it around my body to make the "pop-tart." I basically just folded it over and sewed up the edges leaving room for my head, arm, and legs (had to cut out the other arm hole since it was on the fold).

I measured and cut out the pink fleece for the "frosting" so that it was slightly smaller than the pop-tart shape.

Used a hot pink felt square and cut it up into small rectangles then taped it in place on the frosting while I sewed it into place.

Realized that I should've sewed the frosting onto the pop-tart before sewing the pop-tart closed so I had to seam-rip a side before sewing the frosting on, then re-sewed up the pop-tart. Luckily, I had used a dark thread (out of laziness to change it) so it was easy to seam-rip. In retrospect I should've used a zipper opening because it was difficult taking the costume on and off.

Got a foam board and cut out a cat head shape. I got some gray felt for the cat mask. I wanted to take the easy way out and tried to tape the felt to the foam board but it didn't stick at all. I tried using Elmer's glue but that didn't stick either (I later learned about the existence of felt glue). I tried sewing it with the felt side down and the foam board on top, but the felt got caught on the feed dog(?) and was hard to sew so I had to flip it over to put the foam board on the bottom. Also in retrospect, I should've cut out eye holes.

Finally: photos! Sorry I forgot to take more in-progress shots!

Posted Nov 1, 2011, 4:57 AM UTC

152
kochipoikhttp://tworandomwordsblog.com/ and www.curvysewingcollective.com•

Oh that is so awesome!! Bet it was super comfy too (except for the mask)

1
rbassett•

That's really cool! We did Mario (my little guy), Luigi (my husband) and Toadstool (me) we bought appropriate clothing from value village and I made all the hats, it was tons of fun!

1