USB 2.0 nightmare
Interesting predicament here. So I have an ITX motherboard and 3 of the pins broke off my 20-pin USB 3.0 header, so that port is dead.
I'm using a USB 3.0 to 2.0 adapter on my only 2.0 header on the mobo since I don't have a spare pci expansion slot.
Now I need to connect my Kraken X53 which uses a USB 2.0 header, but like I said I don't have any others to spare.
And now I also need to connect my front panel 2.0 cable from the case. So my question is, if I purchase NZXT's USB 2.0 hub, would it be safe to connect my front panel, water cooler, and the 3.0 to 2.0 adapter all into the hub?
Posted Mar 5, 2021, 4:20 PM UTC · edited
16
Yep, the hub will work. Obviously, you'll be limited to USB 2 speeds on the USB 3 ports, and all of your USB devices connected to the hub will have to share bandwidth, but all of that is fine as long as you're not planning to connect something like a high speed external drive to those ports. One alternative for getting the USB 3 ports on the case to work at full speed is this m.2 adapter, though to be completely honest, I'm not 100% confident in how reliable this brand is.
Thanks so much for your reply. I'll purchase the hub and hook everything up.
As for the adapter, considering how my m.2 slot is covered with the motherboard heatsink, do you think it's alright to leave it uncovered just so I can use that adapter?
Yes, the heatsink is just there to help cool an M.2 SSD if you had one installed there, but the USB adapter I linked will generate far less heat than a high-performance SSD.
Actually, wait... you say "motherboard heatsink". Can you tell me which motherboard you have?
Oh sorry I'm forgetting. Not heatsink, I think I mean shroud?
Anyway here it is https://www.asrock.com/mb/Intel/Z490M-ITXac/index.asp#Specification
I'm assuming you mean the M.2 armor as ASRock calls it? That's completely fine to leave off, as it's just an additional piece of cooling for an M.2 drive, but it doesn't cool anything else on the motherboard. Both motherboard heatsink and motherboard shroud are often used to refer to the cooling used to keep the motherboard chipset cooled, and sometimes that heatsink is integrated with the M.2 heatsink and it would be bad to leave it off.