Question about maximum objects

Factory Optimization

Hello good pioneers! I am currently building my third factory, about 300h into it and its definately going to be bigger than the last ones. Now i've read a lot about the mysterious maximum objects the unreal engine can handle (something around 2,1 million or so) and wondered if there is a way to see how many i am currently using. Maybe with the console? A mod which could display this?

Thanks in advance for tipps!

Posted Mar 9, 2021, 1:41 PM UTC

26
Jumper5353•

I hit the limit a while ago. Just crashes you to desktop when you build one too many things.

You can increase the limit but it has to do with memory and drive I/O so it increases your chances of file corruption. There is a note on the Satisfactory WIKI on how to do it if you wish.

But you have to build really really big to hit the limit. Like having aspersions to use every node on the map kinda big.

My base had at least 780ppm production of most parts, about 100ppm Super Computers, 50ppm Turbo Motors and the full 94.2 Nuclear Fuel rods and 246 nuclear power plants when I hit the limit. Was putting walls and aesthetics on the nuclear power plant when I had the crash. Decided to do an aesthetic without walls instead so I could finish it. That was nearly 300,000 walls sections so maybe that is why I hit the limit. ;)

If you are casual building the limit is nothing to worry about, only map covering megabase are a problem.

Everything you place is an "object" but some things count as more than one like a constructor could be 3 data points, frame, setting, buffer levels. It is a bit of a mystery as it is about data points to remember not actual items placed and they are working on optimization all the time reducing the number of objects (things to remember) by describing things more efficiently. So in general machines are the most Objects but everything you place has some impact. A storage container with a bunch of one item could only be a couple objects but if there are several different items in it there may be several objects to remember.

Tips if you are building big:

  • spread out around the map not just one megabase - overclock manufacturers and such to reduce the number of them needed - remove any conveyor poles and pipe supports you can aesthetically stand - no huge storage buffer arrays other than primary player storage - for long runs between bases a train line could be fewer objects than a bunch of belts, but for short runs belts are usually best as the train stations are a lot of objects - remove any foundations and walls you can aesthetically stand - some mods can reduce your item count like Daisy Chain Power that removes a lot of power poles from your build - really most of us need to avoid investing in aesthetics to save object count.

There is an amazing YouTuber - Amelie of the Sea

An amazing game save with unbelievable aesthetics yet using almost every node on the map. Build the design around the object limit if you notice in many places the foundations, walls and conveyor/pipe poles are deleted to reduce the object count.

4
ChrisMinOP•

Thanks, i'll try this :)

Then again, i was hoping for some sort of console command which would just tell me how many objects are currently being used to avoid the crash. But from what you are writing, it seems like theres a lot of room left. Im just gonna hope for the best xD

1
wivaca•

In a video I watched just the other day, there was discussion of this limit with some interesting tips. Objects in containers don't count and the items on belts are handled a different way, so it sounds like unless you're dropping items in the open, they're not counted.

Each segment of pipe or conveyor counts, so maximizing the length of each section saves capacity as does deleting supports, and using 1x 4m thick foundation in place of 4x 1m foundations reduces count by 3.

With the items on containers and belts pulled out of the equation, it seems mind boggling to consider how vast a build would have to be to reach the limit. Before I knew that, I would have considered a few extra foundations and poles/supports to be rounding error compared to the overall count. Now, eliminating extra foundations, supports, and power poles sounds like it could add up to really make a difference when pushing the object limit.

That being said, some machines/buildings are comprised of multiple objects. They used the Assembler with 4 objects as an example, so I'm not sure Satisfactory-Calculator counts get to that level.

2
ChrisMinOP•

This is good to know, i was worried about using conveyor belts too excessively over long distances.

1
Fatallancer•

Satisfactory Calculator lets you drag and drop your save and can edit the buildings and such. I’m not sure if it will give you a count when you make a selection but that’s the closest thing I know of.

1
The_1_BobRadiation: Because smoke isn't polluting enough•

ImKibitz has a video about this. Turning off the object limit drastically increases your chances of crashing, just so you know.

1