Ableton: Why are my exported songs so quiet?

When i produce, i use my really good headphones, but i need to have my computers volume turned all the way up to 100 when ableton is at 0db and is peaking at around -2db.

Once i export a finnished song that peaks around 0 bd, it still sound so much quieter compared to my other songs i have on itunes.

Any mastering tips out there?

Posted Nov 7, 2011, 11:50 PM UTC

511
Alexis_•

Watch

http://www.youtube.com/watch?v=3Gmex_4hreQ

and learn

http://en.wikipedia.org/wiki/Loudness_war

Edit: Basically, if you want loud, compress and limit the living shit out of your track. It will of course end up sounding like shit. Don't make your tracks too loud.

4
AdventureCoreOP•

so this means that i should just leave my songs as they are? to be honest i think they sound high quality, the only thing is they're quiet.

2
MrPopinjay•

It means you should do it a little bit to get your tracks to a nice volume. That video is pretty over the top.

4
[deleted]•

[deleted]

1
praybzers•

You can have loud tracks without ruining the dynamics. It's called "using compression and limiting correctly."

1
CunningDingus•

if you want a really simple master run it through PSP Vintage Warmer. Adjust the bass and treble and crank the main knob depending on how much loudness you need.

Typically I use loudness maximiser in ozone. Once everything is peaking around 0. On the master chain I use Utility to bring the input down to -6db to give it some headroom.In the maximiser, set the threshold to around -6 (look at the graph next to it to see whats being chopped). Character around 5.3. DC offset ON. Dither it down 16bit using mbit+. Turn off normalise in the export options.

Headphones will always always make your songs sound better- anything you shove in will sound full bodied. You should always produce/master on proper speakers, you can hear the thin parts much easier. In my opinion, it's the only way to get richness in your songs.

3
ma9ellansoundcloud.com/betaunits•

I seriously love PSP Vintage Warmer. There are a lot of presets, too, and I can almost always find one that makes any particular track sound good. Of course you always need to tweak the drive so it's not slammed into the red.

2
sky_kid•

I had this problem for a long time. This article from DJ Tarekith changed everything for me. His one on mixing is also extremely helpful. He says a lot of things that go against common opinion and just seems o be really good at explaining the reasoning behind everything he suggests, which I found extremely helpful.

3
Winnafailure•

Commenting for future reference.

1
Winnafailure•

I've had this problem too, the only way to go about it really is to have a good powerful mixdown that peaks at -4-3db and then do a bit of limiting to bring it up.

1
IveBeenForgotten•

Take a limiter and put it on your master track. Then take the ceiling and put it to about -0.3db or -1db. Pull down the threshold to about -11db. This usually is a decent setting I think, but you may have to change it around a bit.

And you can actually have your song peak at an even lower level, as it's usually a good thing to have some headroom.

PS : I could be wrong, but thats what Ive been getting from tutorials and stuff, Im just a beginner myself, so dont quote me on what I said ^^

1