r/simracing•
DM797

Dayton Audio Pucks - Cheap/Great Base Shaker setup

Image/Gif

I’ve waited a few months before I posted a review, as I wanted to get some experience with using a base shaker setup.

I can’t believe how great these things are, and how affordable they are. For me; this might be the best bang for your buck immersion add-on.

The pucks are around $16CDN each, USB Amp sound card $40CDN, some speaker wire. Link below to images.

I installed them inside my seat, GT Omega XL, and simply pushed them into the foam between the seat strap and the foam of the chair. No screws, nothing. They are set to Left/Right settings in SimHub. These two little pucks are centred right on the middle of my back and can make my teeth rattle if turned up too high. I run them around 50% on the amp and have different % setup in the SimHub software for different car tactile feedback.

For $100CDN it is by far the best upgrade I’ve made to the rig. I can’t live without it anymore. Driving a car feels weird now without feeling the rumble strips, gear shift, or wheel slip. I’m using this with iRacing only. For those who have never considered base shakers, I highly recommend spending $100 on these little pucks in your chair to see if you like it. Up next is VR.....can’t believe I’ve been missing out on the immersion for so long.

Cheers, See everyone on the track. Dayton audio pucks pictures

Posted Apr 5, 2021, 7:25 PM UTC

713
djfil007Plays Arcade Games with a Simucube•

I saw Gamermuscle mention the nobsound. I’m probably gonna similar to this in the coming months after my cockpit frame upgrade. Do you have link to the pucks at $16cad? When I looked earlier it was much more.

1
DM797OPiRacing•

Yup, got them here from Solen Canada in Quebec and shipped to the GTA. Looks like they are up to $19cdn each. In packs of 4 for cheaper it looks like.

Also try your local audio store, might be able to grab them cheaper from a mom/pop audio retailer.

2
djfil007Plays Arcade Games with a Simucube•

Ah, that'd explain the price gap. I was look at 50W versions (since nobsound does 50w x2), and Solen appears to be selling the 15W pucks. How much are you having to turn up the nobsound for the pucks? Makes me wonder if I even need 50W pucks. Though I'd be doing front/rear (one under seat, one under pedals).

1
DM797OPiRacing•

I think the 15w pucks are fine if they’re in your seat / mounted directly within the seat, or on your pedals/pedal plate. I think if they’re mounted to 8020 rig the 15w pucks would be useless, but in my seat I have it turned up to around 50% and anything more makes my teeth rattle.

3
djfil007Plays Arcade Games with a Simucube•

Exactly the insight I was hoping for. Thank you very much.

1
TechnicMOCCSLElitePS4/CSv3i•

I purchase my pucks and nobsound at the end of jan, but only got around to installing them over the Easter weekend. Completely agree they are an amazing little add-on and I’ve not yet tried them in VR which is where they are really mean to shine. I purchased the 4 puck bundle for $45 usd and have ordered another amp so I can run in four corners mode. 2 around the kidneys and 2 by my thighs.

1
DM797OPiRacing•

I’m thinking of going this route. Let me know how you enjoy 4 of them as corners. Left/right is fine, but do feel I’m missing out slightly on having 4 corners.

1
Oneofthe12s•

I run front and back with my pucks. One under my pedals and one on the the crossbar of my gt omega rear frame. Dirt rally 2 in VR is awesome. I used this cheap amp and a power supply from a laptop. Also 3d printed a case for it.

1
Teab8g•

I have two pucks mounted under my seat. Absolutely love it.

1
MJPires•

I have 1 of these pucks under my seat and I use the LFE function in iracing. Works very well. My solution costs me 65 € (cable, puck and a litle amplifier).

1

Have you had any issues with the amp disconnecting? I bought the Nobsound amp and a single (16 ohm) puck, and it works great in iRacing except the amp periodically disconnects from USB. Even at 16 ohms, I only have it turned up about halfway, so it’s not like I’m driving it hard. I could try using my onboard sound with the aux input instead, but I’d rather use it through USB.

1
DM797OPiRacing•

No disconnecting issues at all. Have you tried different USB slot or a different USB cord?

2

Thanks. Probably should’ve been the first thing I thought of. Moving to a USB2 port seems to have worked. Just did a lengthy test session with no disconnects.

1