r/Cameras•
NGHTMR

7artisans 35/1.4 DOF scale

I've been looking at a 35mm lens for street photography to zone focus with. I've stumbled upon the relatively new 7artisans 35 1.4 for Sony full frame.

https://i.imgur.com/0GNMaUU.jpg

Here's a picture of it. Now here's the thing, either I'm going absolutely crazy or the DOF scale on this lens is pure bullshit.

The lens in the picture is focused at about 1.50, maybe 1.60m. Reading the scales, it gives me a depth of field at f/8 from 1m to 4, almost 5 meters.

Punching 1.5m into DOF calculator I get about 1.2m to 2.1m of DOF.

Do manufactureres have significantly different understandings of depth of field or do they just paint it on willy nilly, not caring about accuracy?

Posted Apr 5, 2021, 9:38 PM UTC

26
nxspam•

Good manufacturers print reasonably accurate scales. It’s the backbone of zone focusing with a manual lens. I haven’t used a 7Artisans so I can’t comment on the accuracy or if it is in fact, just for decoration, but my vintage Pentax and Olympus scales are pretty accurate and very useful.

1
cosa_horrible•

I have a Canon FL 35mm/2.5 and the scale is the exact same as the picture of the 7artisans, even if the DOF calculator says something completely different. The same can be said about the two 28mm lenses that I own and the multiple 50mm lenses that I own.

1
henricvs•

It’s correct. Check this link.

1
NGHTMROP•

I don't know man. That summicron is focused at 2m and has a far limit of around 4m at f8. The artisan I posted is focused at 1.5m and reaches almost 5m at the far limit at f8.

1
henricvs•

The numbers are deceiving, because they are ginormous. These are not high end lenses, but you do get quite a lot for your money. Once you’ve used lenses from tons of manufacturers you get used to the way they index. I would not recommend you get this lens if this bugs you. On the other hand, they are popular with folks on a budget.

1
ernie3399M6MarkII|EM5III|LeicaQ|LX100II|NikonZ5•

A lens is in focus only on the focal plane. So the maximum sharpness is only possible in the plane of focus. Your definition of depth of field depends on the sharpness that is acceptable to you. So depending on the resolution of the image you will be taking and the print size or the screen size and the distance from which it is viewed, objects can appear to be reasonably in focus or not. DOF calculator might be using a different acceptable sharpness level for it's DOF scale while 7Artisans might be using something else.

That said 1m to 4m DOF on the 7Artisans is a bit too loose as even my old 35mm film lenses have a much tighter DOF scale. So yeah, the 7Artisan's DOF scale seems a bit useless.

1