Hello peeps i got a bit of stringing in my prints i Used the Chazmeister Profile for Cura on my ender3 V2 only Thing i Changed was retraction Speed from 40mm to 25mm/5mm after i saw that from Cheps Video what Else is needed let me know If you need more Infos Guys

Hello u/RouBBee,

As a reminder, most common print quality issues can be found in the Simplify3D picture guide. Make sure you select the most appropriate flair for your post.

Please remember to include the following details to help troubleshoot your problem.

• Printer & Slicer
• Filament Material and Brand
• Nozzle and Bed Temperature
• Print Speed
• Nozzle Retraction Settings

^Additional ^settings ^or ^relevant ^information ^is ^always ^encouraged.

I am a bot, and this action was performed automatically. Please contact the moderators of this subreddit if you have any questions or concerns.

Filament im using is Grey from Tecbears Printspeed as Set from Profile 50mm/s Anything Else untouched

Go to teaching tech calibration website and do the tests

If all is done and bed is level

I would drop it 10 degrees and go 3 mm 20mms

Failing that hotend fix.