Is it possible to do a shallow cut with moissanite?

Question

Been lurking for a while and really enjoying all your beautiful pictures and videos (more videos pleaaaase!) Finally ready to make an order of my own, but my preferences & lifestyle make a tall ring impractical.

I like these rings with near flat stones, but they’re diamonds. Has anyone been able to do something like these with a mossy and still get some good sparkle?

https://www.instagram.com/p/CNidrX8FUpV/?igshid=13s1uxhdtqgnu

https://www.artemerstudio.com/products/half-moon-diamond-ring-delicate-cluster-ring

https://www.artemerstudio.com/products/diamond-flower-cluster-ring

Posted Apr 18, 2021, 8:11 PM UTC

314
Solid5of10•

Diamondrensu has gorgeous rose cut that are nice and shallow and super shiny. You could go rose cut anywhere tho

4
MrsFuchsia19•

Kuololit seems to do small moissy well. I bet Sam could make that last one for sure. There is a marquis bubble band that several people have here from his store. If you search Kuololit they will come up. You can get an idea of what that cut would look like in Moissanite.

From what I’ve seen on this sub though, I’d guess any of the preferred vendors here could make any of them.

3
goopycatOP•

Ooh, good to know. Thank you!

1
angelwaye✨🛡✨•

There are several cuts that are naturally more shallow then other’s. It is not a great idea to create a shallow cut in moissanite unless it is a super large stone and the recut won’t effect the light performance. If you go and cut down a standard size stone, it will be completely dead. You would be much better off just get a tiny lab diamond or lab gemstone then. For moissanite, I would consider a Rosecut or emerald cut/other stepcuts if you want something shallow. Oval’s and marquise’s are kind of shallow in smaller sizes too. I would think about eternity ring’s or even a very practical bezel. A Rosecut bezel is the best of both worlds. There have been several posted on this sub if you do a search in the taskbar.

3
goopycatOP•

Thank you so much for this info! Would you mind if I asked which vendors you like for lab diamonds / gem stones? I might do a mix and match based on this feedback.

2
angelwaye✨🛡✨•

Most of the vendors are still just doing round’s for smaller lab diamonds or lab diamond melee. I think Tianyu is the only jeweler doing any of the fancy type cuts that I know of on a larger scale for side stones. Ouros Jewelry is another one of our India based jewelers doing almost all of the round, fancy and stepcut diamonds in the .10-.40 carat weight. You would have to check with them as all your designs are a little different. The short answer is that they all do rounds and it depends on the rest. As far as the colored stones, they are typically lower quality flame fusion gemstones. If you want mined or true synthetics then I would look at some of the lapidary sites like r/shinypreciousgems. You might want to consider colored moissanite. Most of them don’t come in melee sizes but probably down to 5mm half carat sizes. It is a hard question to come up with a simple answer unless I know exactly what you want and what you are willing to spend.

2
goopycatOP•

Thank you for giving me all that context - I still have a lot to learn. I honestly hadn't gotten to the point of fixing on a specific ring design or price because I wasn't sure if a shallow cut was even possible with moissanite. (Plus I have the feeling that since I'm not sure which way points up yet when it comes to this topic, my expectations would be unrealistic.)

Ideally I'd like to spend under $500 for a 10K yellow gold ring. Can't go very wide unfortunately because I don't have much flesh to display a stone, which is why I'm looking at smaller multi stone designs or a more oval rose cut center stone. (I think I have a size 4 finger, but usually I get a 4.75 because of my knobby knuckle). A half carat size looks pretty big on my stick fingers 😜

1
angelwaye✨🛡✨•

It is quite a common size for a lot of people here. Rosecuts actually look really good in moissanite. Even better then rosecut diamonds in most instances. If you only have a $500 budget, then you will likely need to go with a Chinese vendor. They won’t be able to do something exactly like this but I thought I would show it as an example o low sitting rosecut rings. You can speak to them about your concerns.

https://www.reddit.com/r/Moissanite/comments/f10rio/and_now_for_something_a_little_different_rose_cut/?utm_source=share&utm_medium=ios_app&utm_name=iossmf

I would consider looking at some fo the preloved on Loupe Troop or Diamond Bistro to see what coms up for sale.

1
joanholmes•
2
goopycatOP•

Oh gosh, this is so close to what I want! Thank you so much for sharing that. (I joined the sub several months after that post, wouldn't have known about it otherwise.)

3
Zoozler•

I love it so much! The only thing I’d do differently is make sure the setting sits a little further off my finger. It’s super low profile but it gathers skin oils pretty fast. If you need any help let me know!

2
PeachPoison_•

Sam can absolutely do the last one. I know because I got a quote for it at some point. Lol My small marquise moissanite don't have ALL the sparkle that the small rounds do, but I honestly can't even tell when I'm wearing it. It is a clean, clear, shiny stone.

I even have a half and half band by sam. Half marquise, half round. It's truly gorgeous and it makes me love the marquise cut.

1
goopycatOP•

Oh really... :) May I ask how much the quote ended up being?

1